EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Controlled Formation and Transition Between CNT-like Structures and SiC in a Single-Source CVD Process Using Vinylsilane on Fe Substrates

Wakana Takeuchi, Yuki Tsuchiizu, Koki Ono, Kenichi Uehara, Daisuke Ohori, Shigeo Yasuhara, Kazuhiko Endo

AppliedPhys · 02.07.2026 · 2 (3) · 7

DOI: 10.3390/appliedphys2030007 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AppliedPhys, online erschienen am 02.07.2026. Verfasst von Wakana Takeuchi und 6 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kanagawa Institute of Industrial Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The formation of carbon nanostructures and silicon carbide (SiC) using a single-source precursor offers a simplified route for material synthesis; however, the factors governing the transition between CNT-like structure formation and SiC growth remain unclear. In this study, the growth behavior of carbon-related structures using vinylsilane was systematically investigated by hot-wall chemical vapor deposition (CVD) on various substrates, including Fe bulk substrates and Fe thin films on SiO2/Si. CNT-like structures were preferentially formed on Fe bulk substrates, whereas Fe thin-film substrates exhibited CNT-like growth at the initial stage followed by increased Si–C-related phase formation with increasing growth temperature and growth time. In contrast, on Fe thin films with limited catalyst amounts, CNT-like growth occurred initially, followed by increased Si–C-related phase formation with increasing growth temperature and growth time. These observations are consistent with a growth transition associated with the balance between Si uptake into the metal and surface SiC formation processes. By controlling catalyst amount, growth temperature, and growth time, the relative formation of CNT-like structures, SiC-rich coatings, and intermediate morphologies could be tuned within a single process. Furthermore, a SiC/CNT-like composite structure was directly formed on a conductive Fe substrate in a one-step CVD process. Electrochemical measurements showed an enhanced current response compared with a bare Fe substrate, indicating preliminary electrochemical activity and suggesting potential applicability as a high-surface-area electrode platform.

Förderung

  • Kanagawa Institute of Industrial Science and Technology

Zitieren

APA

Takeuchi, W., Tsuchiizu, Y., Ono, K., Uehara, K., Ohori, D., Yasuhara, S., & Endo, K. (2026). Controlled Formation and Transition Between CNT-like Structures and SiC in a Single-Source CVD Process Using Vinylsilane on Fe Substrates. AppliedPhys, 2(3), 7. https://doi.org/10.3390/appliedphys2030007

Vancouver

Takeuchi W, Tsuchiizu Y, Ono K, Uehara K, Ohori D, Yasuhara S, et al. Controlled Formation and Transition Between CNT-like Structures and SiC in a Single-Source CVD Process Using Vinylsilane on Fe Substrates. AppliedPhys. 2026;2(3):7. doi:10.3390/appliedphys2030007

BibTeX
@article{Takeuchi2026,
  author = {Takeuchi, Wakana and Tsuchiizu, Yuki and Ono, Koki and Uehara, Kenichi and Ohori, Daisuke and Yasuhara, Shigeo and Endo, Kazuhiko},
  title = {Controlled Formation and Transition Between CNT-like Structures and SiC in a Single-Source CVD Process Using Vinylsilane on Fe Substrates},
  journal = {AppliedPhys},
  year = {2026},
  volume = {2},
  number = {3},
  pages = {7},
  doi = {10.3390/appliedphys2030007}
}
Kostenlos starten →