EUVIMEDEUVIMED entdecken
Crossref

Mechanisms of nucleation, dislocation formation, and stress evolution during atomistic growth of SiC films on miscut 4H-SiC substrates

Kevin W. Kayang, Balaji Raghothamachar, Michael Dudley, Dilip Gersappe

Journal of Applied Physics · 28.06.2026 · 139 (24)

DOI: 10.1063/5.0324186 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 24.06.2026. Verfasst von Kevin W. Kayang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 66 Literaturangaben. Gefördert von: Advanced Research Projects Agency - Energy, onsemi Research Center for Wide Bandgap Materials at Stony Brook University, Stony Brook Research and Computing and Cyberinfrastructure.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Atomistic simulations are performed to investigate the vapor-phase deposition and growth of silicon carbide (SiC) thin films on 4H-SiC substrates with varying miscut angles and substrate temperatures. Substrate temperatures of T = 2200, 2300, and 2400 K and miscut angles of θ=0°, 2°, 4°, and 8° are considered to reveal the atomic-scale mechanisms governing crystal nucleation, polytype evolution, defect formation, and film stress. Crystal nucleation is found to initiate only after complete surface coverage by an amorphous adatom layer, followed by growth through atomic rearrangement into predominantly hexagonal (2H/4H) stacking. Local cubic stacking faults form when limited surface mobility inhibits relaxation into the hexagonal stacking sequence. The thickness of the amorphous surface layer, ranging from approximately 0.1 to 3 nm, decreases systematically with increasing substrate temperature and is strongly influenced by the substrate miscut angle. Dislocations with Burgers vectors of 1/3⟨11¯00⟩, 1/3⟨12¯10⟩, and 〈0001〉 form during growth, with their density and temporal evolution governed by the coupled effects of substrate temperature and miscut angle. Increasing substrate temperature significantly reduces dislocation density and promotes dislocation annihilation, particularly for low-miscut angle substrates. The deposited films exhibit tensile residual stresses that increase monotonically during growth, while the stress magnitude decreases by approximately 10% with each 100 K increase in substrate temperature. These results identify substrate miscut angle and temperature as key physical parameters controlling defect formation, microstructural evolution, and stress relaxation during SiC thin-film growth, providing mechanistic insight relevant for optimization of low-defect SiC films for wide-bandgap semiconductor applications.

Förderung

  • Advanced Research Projects Agency - Energy
  • onsemi Research Center for Wide Bandgap Materials at Stony Brook University
  • Stony Brook Research and Computing and Cyberinfrastructure
  • Institute for Advanced Computational Science at Stony Brook University
  • National Science Foundation
  • Empire State Development's Division of Science, Technology and Innovation

Zitieren

APA

Kayang, K. W., Raghothamachar, B., Dudley, M., & Gersappe, D. (2026). Mechanisms of nucleation, dislocation formation, and stress evolution during atomistic growth of SiC films on miscut 4H-SiC substrates. Journal of Applied Physics, 139(24). https://doi.org/10.1063/5.0324186

Vancouver

Kayang KW, Raghothamachar B, Dudley M, Gersappe D. Mechanisms of nucleation, dislocation formation, and stress evolution during atomistic growth of SiC films on miscut 4H-SiC substrates. Journal of Applied Physics. 2026;139(24). doi:10.1063/5.0324186

BibTeX
@article{Kayang2026,
  author = {Kayang, Kevin W. and Raghothamachar, Balaji and Dudley, Michael and Gersappe, Dilip},
  title = {Mechanisms of nucleation, dislocation formation, and stress evolution during atomistic growth of SiC films on miscut 4H-SiC substrates},
  journal = {Journal of Applied Physics},
  year = {2026},
  volume = {139},
  number = {24},
  doi = {10.1063/5.0324186}
}
Kostenlos starten →