EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultrasonic Pulse-Echo Evaluation of Resistance Spot-Welded Joints in Thin Car-Body Steel Sheets

Dariusz Ulbrich, Piotr Banas, Wiktor Cisek, Łukasz Warguła, Bartosz Wieczorek, Aigerim Keshubayeva, Zhanar Zhunusbekova

Applied Sciences · 20.11.2026 · 16 (22) · 11503

DOI: 10.3390/app162211503 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 20.11.2026. Verfasst von Dariusz Ulbrich und 6 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Resistance spot welding is the principal joining process for car bodies, and the condition of several thousand welds per vehicle has to be confirmed without destroying the product. This study examined to what extent the ultrasonic pulse-echo technique, applied with a universal flaw detector, identifies the condition of spot welds in thin car-body steel sheet. In total, 150 lap joints of 0.7 mm sheet were welded at constant electrode force with 15 combinations of voltage (2.10, 2.94 and 4.22 V) and weld time (0.2–1.0 s). Each weld was tested three times with a 20 MHz delay-line probe. The numbers of back-wall and intermediate echoes as well as the residual joint thickness (RWS) were recorded. Welds made at 2.10 V showed intermediate echoes from the unfused sheet interface and an RWS of 1.27–1.30 mm, consistent with an undersized nugget. At 2.94 V, no intermediate echoes were recorded at welding times of 0.2 and 0.4 s, whereas some readings at 0.6 s contained intermediate echoes, resulting in mixed ultrasonic indications for series h. Excess heat input (4.22 V, or 2.94 V for 0.8–1.0 s) reduced the number of back-wall echoes to about one per reading and often caused a complete loss of signal. Used jointly, the three indications distinguished echo patterns interpreted as undersized, correctly formed and overheated welds, and suggested a preliminary parameter range of 2.94 V and 0.2–0.6 s for the tested set-up, which requires verification by destructive testing.

Förderung

  • Ministry of Science and Higher Education

Zitieren

APA

Ulbrich, D., Banas, P., Cisek, W., Warguła, Ł., Wieczorek, B., Keshubayeva, A., & Zhunusbekova, Z. (2026). Ultrasonic Pulse-Echo Evaluation of Resistance Spot-Welded Joints in Thin Car-Body Steel Sheets. Applied Sciences, 16(22), 11503. https://doi.org/10.3390/app162211503

Vancouver

Ulbrich D, Banas P, Cisek W, Warguła Ł, Wieczorek B, Keshubayeva A, et al. Ultrasonic Pulse-Echo Evaluation of Resistance Spot-Welded Joints in Thin Car-Body Steel Sheets. Applied Sciences. 2026;16(22):11503. doi:10.3390/app162211503

BibTeX
@article{Ulbrich2026,
  author = {Ulbrich, Dariusz and Banas, Piotr and Cisek, Wiktor and Warguła, Łukasz and Wieczorek, Bartosz and Keshubayeva, Aigerim and Zhunusbekova, Zhanar},
  title = {Ultrasonic Pulse-Echo Evaluation of Resistance Spot-Welded Joints in Thin Car-Body Steel Sheets},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {11503},
  doi = {10.3390/app162211503}
}
Kostenlos starten →