EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Interfacial Characteristics of Ti/Steel Joints Welded by Resistance Spot Welding with Bi-Interlayer of Nb-Ni

Tong Wu, Xiaowen Li, Yaqiang Wang, Nannan Wang iD, Ranfeng Qiu iD, Shengxiong Tang

Materials · 11.06.2026 · 19 (12) · 2518

DOI: 10.3390/ma19122518 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.06.2026. Verfasst von Tong Wu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Materials Engineering College, Henan Polytechnic, Zhengzhou 450046, China. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 2025 Scientific Research Project of Henan Polytechnic,, 2025 Scientific Research Project of Henan Polytechnic, China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Resistance spot welding was performed to join 2 mm thick TA2 titanium plate and Q235 steel plate using an Nb-Ni bi-interlayer. The microstructure of the interfacial zone was observed and analyzed, and the tensile shear load of the joint was evaluated. The joints obtained display double-nugget-type and penetration-type joints. For the double-nugget-type joint, Ni6Nb7 and Ni3Nb layers have been formed in the region between the residual Nb layer and the steel, while for the penetration-type joint, a mixed nugget composed of Ti-Fe intermetallic compounds was formed at the center zone of the weld. As the welding current increased or welding time extended, the tensile shear load of the joint exhibited a trend of initially increasing and subsequently decreasing. When a bi-interlayer consisting of 0.05 mm-Nb and 0.04 mm-Ni is utilized, the tensile shear load of the joint reached the maximum value of approximately 8.7 kN under the condition of 11 kA welding current, 300 ms welding time, and 3 kN electrode pressure. The results indicate that the Nb layer can effectively impede the cross-interface diffusion of Ti atoms and Ni-Nb intermetallic compound layers are formed in the interface region in the case that the interlayer thickness and the welding parameters are well-matched when resistance spot welding of Ti/steel is performed with a bi-interlayer of Nb-Ni.

Schlagwörter

Stichwörter der Autor:innen

bi-interlayerresistance spot weldingsteeltitanium

Autor:innen und Institutionen

  • Materials Engineering College, Henan Polytechnic, Zhengzhou 450046, China.
  • School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471023, China.
  • State Key Laboratory of High Temperature Light Alloys and Application Technology, Luoyang 471039, China.
  • Graduate School of Science and Technology, Kumamoto University, Kumamoto 860-8555, Japan.

ORCID-Profile: Nannan Wang, Ranfeng Qiu

Förderung

  • 2025 Scientific Research Project of Henan Polytechnic,
  • 2025 Scientific Research Project of Henan Polytechnic, China

Zitieren

APA

Wu, T., Li, X., Wang, Y., Wang, N., Qiu, R., & Tang, S. (2026). Interfacial Characteristics of Ti/Steel Joints Welded by Resistance Spot Welding with Bi-Interlayer of Nb-Ni. Materials, 19(12), 2518. https://doi.org/10.3390/ma19122518

Vancouver

Wu T, Li X, Wang Y, Wang N, Qiu R, Tang S. Interfacial Characteristics of Ti/Steel Joints Welded by Resistance Spot Welding with Bi-Interlayer of Nb-Ni. Materials. 2026;19(12):2518. doi:10.3390/ma19122518

BibTeX
@article{Wu2026,
  author = {Wu, Tong and Li, Xiaowen and Wang, Yaqiang and Wang, Nannan and Qiu, Ranfeng and Tang, Shengxiong},
  title = {Interfacial Characteristics of Ti/Steel Joints Welded by Resistance Spot Welding with Bi-Interlayer of Nb-Ni},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2518},
  doi = {10.3390/ma19122518}
}
Kostenlos starten →