Photocatalytic 3D-Printed Cement for On-Site Active Patterns Deposition on Buildings’ Facades
Applied Sciences · 19.11.2026 · 16 (22) · 11472
DOI: 10.3390/app162211472 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 19.11.2026. Verfasst von Paulina Szołdra und 3 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: OPUS 28 project of the National Science Centre, “Excellence initiative—research university” for the AGH University of Krakow.
Abstract (Originalsprache)
This study investigates the fabrication and photocatalytic performance of 3D-printed cementitious patterns containing titanium dioxide (TiO2) (TioCem®), produced using an extrusion-based additive manufacturing technique and a wet-on-wet approach. Printed paths with different widths, corresponding to varying fractions of photocatalytically active surface coverage, were fabricated and compared with a fully photocatalytic reference sample. The photocatalytic performance was evaluated under laminar flow conditions using nitrogen oxides (NOx) degradation tests, under UV irradiation at 365 nm. The results demonstrate a linear relationship between NOx removal efficiency and the proportion of active surface area, with photocatalytic degradation efficiencies ranging from approximately 28% for samples with ~50% active coverage to 45.3% for 75% coverage, and 57.9% for the fully active reference sample. The findings indicate that photocatalytic performance can be effectively predicted based on geometric design parameters of the printed patterns. Beyond material performance, the study highlights the potential of 3D printing to integrate photocatalytic functionality with architectural design, enabling the fabrication of customizable photocatalytic patterns on cementitious components during prefabrication using a wet-on-wet approach. This concept offers opportunities for developing environmentally responsive, architecturally expressive, and functionally enhanced building elements, particularly for applications in transport infrastructure and logistics facilities. Its potential extension to the functional modification of existing building surfaces represents a promising direction for future research.
Förderung
- OPUS 28 project of the National Science Centre
- “Excellence initiative—research university” for the AGH University of Krakow
Zitieren
APA
Szołdra, P., Kitala, M., Kroll, L., & Pichór, W. (2026). Photocatalytic 3D-Printed Cement for On-Site Active Patterns Deposition on Buildings’ Facades. Applied Sciences, 16(22), 11472. https://doi.org/10.3390/app162211472
Vancouver
Szołdra P, Kitala M, Kroll L, Pichór W. Photocatalytic 3D-Printed Cement for On-Site Active Patterns Deposition on Buildings’ Facades. Applied Sciences. 2026;16(22):11472. doi:10.3390/app162211472
BibTeX
@article{Szodra2026,
author = {Szołdra, Paulina and Kitala, Marcin and Kroll, Lothar and Pichór, Waldemar},
title = {Photocatalytic 3D-Printed Cement for On-Site Active Patterns Deposition on Buildings’ Facades},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {22},
pages = {11472},
doi = {10.3390/app162211472}
}
EUVIMED