EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Research on Heat Transfer Through 3D-Printed Plates: Implications for the Development of Smart Facades

Dan-Radu Baraboi, Daniela Șova, Gabriel Năstase iD

Materials · 01.07.2026 · 19 (13) · 2793

DOI: 10.3390/ma19132793 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.07.2026. Verfasst von Dan-Radu Baraboi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Building Services, Transylvania University of Brasov, 500036 Brasov, Romania. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the increasing demand for energy-efficient buildings, this study experimentally characterizes the effective (λeff) and apparent (λapp) thermal conductivity of 3D-printed polymer plates. While 3D printing offers significant design flexibility, a lack of comprehensive comparative data between printable polymers and conventional building materials limits their integration into large-scale facade systems. This research investigates four distinct materials: standard polylactic acid (PLA Basic), foamable poly-L-lactic acid (PLA Aero), amorphous polyethylene terephthalate glycol (PETG), and carbon fiber-reinforced polyethylene terephthalate (PET-CF). Utilizing the guarded hot plate (GHP) method (ASTM C177, EN 12667, EN 12939), steady-state heat flux and temperature gradients were measured. The methodology incorporates a rigorous uncertainty analysis (k = 2) addressing the inherent inhomogeneity of additively manufactured components. Results demonstrate significant variations: PLA Aero achieved a 57.3% reduction in thermal conductivity (0.114 ± 0.005 W/(m·K)) compared to PLA Basic (0.267 ± 0.011 W/(m·K)), while PET-CF showed increased conductivity (0.533 ± 0.021 W/(m·K)) due to carbon fiber bridging. Notably, multi-layered PLA Aero assemblies outperformed conventional double-glazed units, reaching a minimum λapp of 0.051 W/(m·K). These findings validate the GHP method for 3D-printed polymers and provide a technical foundation for material selection in next-generation, energy-efficient smart facades.

Schlagwörter

Stichwörter der Autor:innen

3D printingPET-CFPLA Aeroapparent thermal conductivityeffective thermal conductivityfused deposition modeling (FDM)guarded hot plate (GHP)polymer compositessmart facadesthermal resistance

Autor:innen und Institutionen

  • Department of Building Services, Transylvania University of Brasov, 500036 Brasov, Romania.
  • Department of Mechanical Engineering, Transylvania University of Brasov, 500036 Brasov, Romania.

ORCID-Profile: Gabriel Năstase

Zitieren

APA

Baraboi, D. R., Șova, D., & Năstase, G. (2026). Experimental Research on Heat Transfer Through 3D-Printed Plates: Implications for the Development of Smart Facades. Materials, 19(13), 2793. https://doi.org/10.3390/ma19132793

Vancouver

Baraboi DR, Șova D, Năstase G. Experimental Research on Heat Transfer Through 3D-Printed Plates: Implications for the Development of Smart Facades. Materials. 2026;19(13):2793. doi:10.3390/ma19132793

BibTeX
@article{Baraboi2026,
  author = {Baraboi, Dan-Radu and Șova, Daniela and Năstase, Gabriel},
  title = {Experimental Research on Heat Transfer Through 3D-Printed Plates: Implications for the Development of Smart Facades},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {2793},
  doi = {10.3390/ma19132793}
}
Kostenlos starten →