Dimensional Changes and Shrinkage Behavior of STS630 Bent-Sheet Components During Aging Heat Treatment
Applied Sciences · 31.10.2026 · 16 (21) · 10804
DOI: 10.3390/app162110804 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 31.10.2026. Verfasst von Joohyun Kim und 3 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Paired coordinate measuring machine (CMM) measurements documented dimensional changes in sixteen STS630 bent-sheet components aged in one batch at 480 ± 10 °C for 3 ± 0.5 h. The same CMM and feature-specific styli were used before and after treatment in a room maintained at 20 °C. All 64 longitudinal distances, four per component, decreased. The confidentiality-scaled mean and sample standard deviation of the sixteen component-mean shrinkage values were 0.5888 and 0.0231 mm, respectively. The scale-invariant mean shrinkage ratio was 0.0461%. Comparison with the representative 0.045% H900 contraction concerns magnitude because the reference hold is 1 h. A companion coupon processed in the same batch had a mean Rockwell C hardness of 46 HRC from five readings, within the production requirement of 42–50 HRC. Cross-sectional distances, coordinates, and angles showed quantity-dependent signed changes. Small feature differences are interpreted descriptively because task-specific uncertainty has not been quantified. Precipitation-related reference-length change, forming-stress redistribution, and fixture interaction are discussed as hypotheses. The contribution is a paired component-level account of longitudinal contraction and cross-sectional inspection quantities, providing an empirical basis for subsequent dimensional assessment.
Zitieren
APA
Kim, J., Lee, K., Kim, S., & Park, J. (2026). Dimensional Changes and Shrinkage Behavior of STS630 Bent-Sheet Components During Aging Heat Treatment. Applied Sciences, 16(21), 10804. https://doi.org/10.3390/app162110804
Vancouver
Kim J, Lee K, Kim S, Park J. Dimensional Changes and Shrinkage Behavior of STS630 Bent-Sheet Components During Aging Heat Treatment. Applied Sciences. 2026;16(21):10804. doi:10.3390/app162110804
BibTeX
@article{Kim2026,
author = {Kim, Joohyun and Lee, Kanghoon and Kim, Seungchul and Park, Jisang},
title = {Dimensional Changes and Shrinkage Behavior of STS630 Bent-Sheet Components During Aging Heat Treatment},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {21},
pages = {10804},
doi = {10.3390/app162110804}
}
EUVIMED