EUVIMEDEUVIMED entdecken
Crossref

Changes of Widmanstätten Structure in Ti-6Al-4V Alloy During Heat Treatment

S. M. Thang, N. A. Xuan, N. D. Nam, P. M. Khanh

Practical Metallography · 26.07.2026 · 63 (5) · 337-360

DOI: 10.1515/pm-2026-0027 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Practical Metallography, online erschienen am 30.07.2026. Verfasst von S. M. Thang und 3 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper studies the morphological changes in the microstructure of Ti-6Al-4V alloy, focusing on the two-phase α and β of Widmanstätten structure, created in the state after annealing at 900 °C, slow cooling. The annealed samples were quenched at different temperatures of 820 °C, 900 °C, 1000 °C below and above the T β transition temperature of Ti-6Al-4V alloy, with a holding time of 2 hours. The sample was quenched in the two-phase region (α + β) at 900 °C/water/2 h, aged at different temperatures and times, including 400 °C – 4 h, 525 °C – 1 h, 4 h and 7 h, aged at 650 °C – 4 h. Observe the change in microstructure, change in size and distribution of α, β phase plates in Widmanstätten structure after heat treatment processes to determine the effect of aging on the change in Widmanstätten structure leading to the change in mechanical properties of Ti-6Al-4V alloy. The result showed that the aging processes according to temperature and time decomposed the α’ martensite phase after quenching into new α and β phases. Thereby, the β retained was partially converted after quenching into β. Despite the change in shape, distribution and proportion of the β and β plates after quenching, the Widmanstätten structure was maintained within the grains.

Zitieren

APA

Thang, S. M., Xuan, N. A., Nam, N. D., & Khanh, P. M. (2026). Changes of Widmanstätten Structure in Ti-6Al-4V Alloy During Heat Treatment. Practical Metallography, 63(5), 337-360. https://doi.org/10.1515/pm-2026-0027

Vancouver

Thang SM, Xuan NA, Nam ND, Khanh PM. Changes of Widmanstätten Structure in Ti-6Al-4V Alloy During Heat Treatment. Practical Metallography. 2026;63(5):337-360. doi:10.1515/pm-2026-0027

BibTeX
@article{Thang2026,
  author = {Thang, S. M. and Xuan, N. A. and Nam, N. D. and Khanh, P. M.},
  title = {Changes of Widmanstätten Structure in Ti-6Al-4V Alloy During Heat Treatment},
  journal = {Practical Metallography},
  year = {2026},
  volume = {63},
  number = {5},
  pages = {337--360},
  doi = {10.1515/pm-2026-0027}
}
Kostenlos starten →