EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructural Length-Scale Effects on Shaped-Charge Jet Formation and Critical Liner Thickness: An Anisotropic Thermoviscoplastic Modeling Study

Wanqian Yu, Qianli Ma, Wenhao Yue, Sihan Zhao, Long Ji, Haijun Zhang, Hao Wang, Zhida Huang, Huming Liao, Yanhong Yang, Shaohua Jin, Bo Li

Applied Sciences · 24.10.2026 · 16 (21) · 10537

DOI: 10.3390/app162110537 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 24.10.2026. Verfasst von Wanqian Yu und 11 weiteren Autor:innen. Die Arbeit nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Laboratory of Land and Air Based Information Perception and Control, Science and Technology Innovation Key R\&D Program of Chongqing, Key R\&D Program of Jiangxi Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study develops a thermoviscoplastic model that incorporates an effective through-thickness microstructural length into the Hill48 yield criterion for shaped-charge liners. The model is implemented in the axisymmetric Hot Optimal Transportation Meshfree (HOTM) framework and verified through directional-yield and material-coordinate transformation tests. An isotropic bulk reference is adopted to isolate the thickness-dependent directional correction in comparisons with conventional J2 plasticity. Comparison with a published experiment supports the predicted global jet-formation response, while independent validation of the microstructural mechanism remains necessary. For the representative numerical case, the proposed model predicts higher jet-tip velocity, greater jet length, and modified deformation localization. A Walsh-type plastic-instability criterion is used to bracket the critical liner thickness for three charge calibers. The nominal critical thickness increases with caliber, whereas its normalized value decreases, indicating a departure from proportional scaling within the investigated range. These results demonstrate the sensitivity of the predicted jet response to the assumed thickness-dependent constitutive description. The findings remain limited to the adopted phenomenological parameters and investigated configurations and do not establish a general scaling law. The framework provides a basis for subsequent material calibration and experimental validation.

Förderung

  • National Key Laboratory of Land and Air Based Information Perception and Control
  • Science and Technology Innovation Key R\&D Program of Chongqing
  • Key R\&D Program of Jiangxi Province
  • National Natural Science Foundation of China

Zitieren

APA

Yu, W., Ma, Q., Yue, W., Zhao, S., Ji, L., Zhang, H., Wang, H., Huang, Z., Liao, H., Yang, Y., Jin, S., & Li, B. (2026). Microstructural Length-Scale Effects on Shaped-Charge Jet Formation and Critical Liner Thickness: An Anisotropic Thermoviscoplastic Modeling Study. Applied Sciences, 16(21), 10537. https://doi.org/10.3390/app162110537

Vancouver

Yu W, Ma Q, Yue W, Zhao S, Ji L, Zhang H, et al. Microstructural Length-Scale Effects on Shaped-Charge Jet Formation and Critical Liner Thickness: An Anisotropic Thermoviscoplastic Modeling Study. Applied Sciences. 2026;16(21):10537. doi:10.3390/app162110537

BibTeX
@article{Yu2026,
  author = {Yu, Wanqian and Ma, Qianli and Yue, Wenhao and Zhao, Sihan and Ji, Long and Zhang, Haijun and Wang, Hao and Huang, Zhida and Liao, Huming and Yang, Yanhong and Jin, Shaohua and Li, Bo},
  title = {Microstructural Length-Scale Effects on Shaped-Charge Jet Formation and Critical Liner Thickness: An Anisotropic Thermoviscoplastic Modeling Study},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {21},
  pages = {10537},
  doi = {10.3390/app162110537}
}
Kostenlos starten →