Numerical Simulation Study on Region Tracking of Jet Formation and Armor-Piercing Process of Zirconium Alloy Shaped Charge Liner
Technologies · 08.04.2026 · 14 (4) · 216
DOI: 10.3390/technologies14040216 ↗Kurz gefasst
Fachartikel in der Zeitschrift Technologies, online erschienen am 08.04.2026. Verfasst von Yan Wang und 3 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Laboratory Foundation of Science and Technology on Materials under Shock and Impact, Beijing Institute of Technology Research Fund Program for Young Scholars.
Abstract (Originalsprache)
Zr alloy-shaped charge liners (SCLs) offer broad application prospects due to their multiple post-penetration damage effects. However, research on these liners is still in its early stages. The mechanisms of jet formation and penetration for Zr alloys SCL remain unclear, and the specific contribution of different liner regions to the penetration process is not yet understood. This gap in knowledge has limited their structural design to a black-box correlation between global structural parameters and macroscopic penetration efficiency. To address this gap, a region-tracing Smoothed Particle Hydrodynamics (SPH) simulation was employed. Following a strategy of “wall thickness layering + axial segmentation,” the Zr alloy liner was partitioned into ten characteristic regions. This methodology facilitated the tracking of material transport from each region during jet formation and penetration into an AISI 1045 steel target. The contribution of each region to the penetration depth was then quantitatively assessed via post-processing. For the first time, the “critical region” contributing most to penetration depth was identified, and the influence of the liner’s cone angle and wall thickness on the contribution of each region was revealed. This study enhances the theoretical framework for understanding the damage effects of Zr alloy shaped charge liners. It not only advances the fundamental understanding of jet penetration mechanisms but also provides a theoretical basis for the refined design and performance optimization of these liners.
Förderung
- National Natural Science Foundation of China
- National Key Laboratory Foundation of Science and Technology on Materials under Shock and Impact
- Beijing Institute of Technology Research Fund Program for Young Scholars
Zitieren
APA
Wang, Y., Du, Y., Liu, X., & Liu, J. (2026). Numerical Simulation Study on Region Tracking of Jet Formation and Armor-Piercing Process of Zirconium Alloy Shaped Charge Liner. Technologies, 14(4), 216. https://doi.org/10.3390/technologies14040216
Vancouver
Wang Y, Du Y, Liu X, Liu J. Numerical Simulation Study on Region Tracking of Jet Formation and Armor-Piercing Process of Zirconium Alloy Shaped Charge Liner. Technologies. 2026;14(4):216. doi:10.3390/technologies14040216
BibTeX
@article{Wang2026,
author = {Wang, Yan and Du, Yifan and Liu, Xingwei and Liu, Jinxu},
title = {Numerical Simulation Study on Region Tracking of Jet Formation and Armor-Piercing Process of Zirconium Alloy Shaped Charge Liner},
journal = {Technologies},
year = {2026},
volume = {14},
number = {4},
pages = {216},
doi = {10.3390/technologies14040216}
}
EUVIMED