EUVIMEDDécouvrir EUVIMED
Open access · CC BY 4.0

KH550-Modified Graphene/WPU Composite Films with Enhanced Dielectric Response for Electric-Field Sensing Electrodes

Nanhui Zhang, Jiao Sun, Chi Zhang, Hang Wang, Xiaoyu Xie, Zhensheng Wu

Applied Sciences · 2026-08-21 · 16 (16) · 8317

DOI: 10.3390/app16168317 ↗

At a glance

Journal article in Applied Sciences, published online on 2026-08-21. Written by Nanhui Zhang and 5 co-authors. 28 references. The full text is freely available (open access, CC BY 4.0). Funded by: Science and Technology Project of China Southern Power Grid Co., Ltd..

RésuméRéférences bibliographiquesCiteRelated studies

Abstract (original language)

Miniaturized spatial electric field sensors often exhibit insufficient front-end charge coupling because of their limited sensing area. To address this material-level bottleneck, KH550-functionalized graphene composite films were developed as candidate electrode materials for spatial electric-field sensing. Single-layer and multilayer graphene powders were modified with the silane coupling agent KH550 and dispersed in a waterborne polyurethane/PVP matrix to fabricate composite films. The sensing mechanism was analyzed from the Maxwell–Wagner–Sillars interfacial polarization and electrode-equivalent capacitance perspectives. The modified materials were characterized by SEM, EDS, Raman spectroscopy, FTIR spectroscopy, low-frequency dielectric measurements, and broadband high-frequency impedance measurements. KH550 functionalization introduced Si- and N-containing surface species and increased disorder or sp3-related structural features while retaining the layered graphene structure. The film formulation selected through qualitative visual screening contained 0.16 g of graphene, 10 mL of waterborne polyurethane, and 0.05 g of PVP. Under AC excitation, the relative permittivity of the composite film containing KH550-functionalized multilayer graphene was approximately 18% higher than that of its unmodified counterpart. Broadband measurements showed material-dependent changes in the reflection and impedance responses of the electrode–fixture configurations. The modified multilayer-graphene electrode exhibited a different distribution of reflection minima, resistance maxima, and capacitive–inductive transitions from the unmodified and copper electrodes. Because the measured response includes contributions from the coating, substrate, fixture, and parasitic elements, these results are interpreted as comparative system-level responses. These results indicate that interfacial engineering of graphene composite films can enhance electrode-level dielectric response and charge-coupling capability, providing a material basis for non-contact electric field sensing electrodes.

Funding

  • Science and Technology Project of China Southern Power Grid Co., Ltd.

Cite

APA

Zhang, N., Sun, J., Zhang, C., Wang, H., Xie, X., & Wu, Z. (2026). KH550-Modified Graphene/WPU Composite Films with Enhanced Dielectric Response for Electric-Field Sensing Electrodes. Applied Sciences, 16(16), 8317. https://doi.org/10.3390/app16168317

Vancouver

Zhang N, Sun J, Zhang C, Wang H, Xie X, Wu Z. KH550-Modified Graphene/WPU Composite Films with Enhanced Dielectric Response for Electric-Field Sensing Electrodes. Applied Sciences. 2026;16(16):8317. doi:10.3390/app16168317

BibTeX
@article{Zhang2026,
  author = {Zhang, Nanhui and Sun, Jiao and Zhang, Chi and Wang, Hang and Xie, Xiaoyu and Wu, Zhensheng},
  title = {KH550-Modified Graphene/WPU Composite Films with Enhanced Dielectric Response for Electric-Field Sensing Electrodes},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {16},
  pages = {8317},
  doi = {10.3390/app16168317}
}
Start for free →