EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A 2-Dimensional Continuous Wavelet Transform Technique for Composite Panel Inspections by Scanning Laser Doppler Vibrometry

Alessandro Annessi, Daniele Candelaresi, Gloria Allevi, Milena Martarelli, Paolo Castellini

Applied Sciences · 30.07.2026 · 16 (15) · 7577

DOI: 10.3390/app16157577 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 30.07.2026. Verfasst von Alessandro Annessi und 4 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lamb waves propagation analysis is among the leading-edge approaches for the Non-Destructive Testing of composite thin-walled structures. The underlying diagnostic principle relies on the dependence of elastic waves wavelength on the plate thickness through which they propagate. Therefore, critical defects in composite panels, such as delaminations, can be detected by a non-contact, automated and high-resolution method such as Laser Doppler Vibrometry. The general approach applied in signal processing is referred to as Local Wavenumber Estimation. It consists of creating an image of the average wavelength over the acquisition frequency band in which the pixel element corresponds to a point of the vibrometer scan grid. The standard signal processing approach is typically implemented via the Short Space Fourier Transform. While effective at creating an average wavelength image over the acquisition frequency band, a major drawback of the Short Space Fourier Transform is its heavy reliance on the a priori selection of a spatial window size; a suboptimal choice can severely degrade detection robustness and spatial resolution. To overcome this limitation, we propose a novel method based on the 2D Continuous Wavelet Transform for the detection of defects in composite structures based on the isotropic Morlet wavelet. Thereafter, the proposed method is experimentally validated exploiting a glass fiber reinforced plate with an induced delamination. The proposed method proves superior on average by eliminating parameter dependency while preserving the original image resolution, resulting in a 66% Intersection over Union metric, comparable with the values of the standard method, but with a lower computational time.

Zitieren

APA

Annessi, A., Candelaresi, D., Allevi, G., Martarelli, M., & Castellini, P. (2026). A 2-Dimensional Continuous Wavelet Transform Technique for Composite Panel Inspections by Scanning Laser Doppler Vibrometry. Applied Sciences, 16(15), 7577. https://doi.org/10.3390/app16157577

Vancouver

Annessi A, Candelaresi D, Allevi G, Martarelli M, Castellini P. A 2-Dimensional Continuous Wavelet Transform Technique for Composite Panel Inspections by Scanning Laser Doppler Vibrometry. Applied Sciences. 2026;16(15):7577. doi:10.3390/app16157577

BibTeX
@article{Annessi2026,
  author = {Annessi, Alessandro and Candelaresi, Daniele and Allevi, Gloria and Martarelli, Milena and Castellini, Paolo},
  title = {A 2-Dimensional Continuous Wavelet Transform Technique for Composite Panel Inspections by Scanning Laser Doppler Vibrometry},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {15},
  pages = {7577},
  doi = {10.3390/app16157577}
}
Kostenlos starten →