EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Mechanical Properties and Failure Mechanisms of Sandstone Influenced by Fracture Dip Angle and Fracture Number

Junhong Lian, Baolin Li, Zhonghui Li, Xiong Cao, Xiayan Zhang, Yiping Liu, Nan Liang, Meng Zhang, Xuelong Li

Applied Sciences · 2026-06-24 · 16 (13) · 6352

DOI: 10.3390/app16136352 ↗

At a glance

Journal article in Applied Sciences, published online on 2026-06-24. Written by Junhong Lian and 8 co-authors. 45 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Natural Science Foundation of China.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Fractures are widely developed in deep coal-mine surrounding rocks. They weaken the load-bearing capacity and energy-storage capacity of rock specimens, which may induce surrounding-rock deformation, roof collapse, and other hazards. Current studies on fractured rock masses mainly focus on a single parameter, such as fracture number or fracture dip angle. However, their coupled effects remain unclear. Integrated analyses of mechanical behavior, crack propagation, and energy evolution are also limited. In this study, uniaxial compression simulations of intact sandstone, single-fracture sandstone, and double-fracture sandstone were conducted using PFC2D. The effects of fracture number and fracture dip angle on mechanical properties and failure characteristics were investigated. The results show that fractures reduced the peak stress and modulus of elasticity. A stronger weakening effect was observed with increasing fracture number. With increasing fracture dip angle, both peak stress and modulus of elasticity showed a V-shaped trend. The minimum peak stress occurred at 15°, while the minimum modulus of elasticity occurred at 45°. Sandstone failure was mainly dominated by tensile cracks. At 15°, the total crack number was the lowest, with 932 and 818 cracks for single-fracture and double-fracture specimens, respectively. Energy analysis showed that increasing fracture number reduced elastic strain energy and promoted dissipated energy. The weakest energy-storage capacity was observed at 30°. Overall, fracture number and fracture dip angle jointly controlled strength degradation, crack propagation, and energy evolution. This study provides a reference for fracture–damage assessment and disaster prevention in deep coal-bearing sandstone.

Funding

  • National Natural Science Foundation of China

Cite

APA

Lian, J., Li, B., Li, Z., Cao, X., Zhang, X., Liu, Y., Liang, N., Zhang, M., & Li, X. (2026). Mechanical Properties and Failure Mechanisms of Sandstone Influenced by Fracture Dip Angle and Fracture Number. Applied Sciences, 16(13), 6352. https://doi.org/10.3390/app16136352

Vancouver

Lian J, Li B, Li Z, Cao X, Zhang X, Liu Y, et al. Mechanical Properties and Failure Mechanisms of Sandstone Influenced by Fracture Dip Angle and Fracture Number. Applied Sciences. 2026;16(13):6352. doi:10.3390/app16136352

BibTeX
@article{Lian2026,
  author = {Lian, Junhong and Li, Baolin and Li, Zhonghui and Cao, Xiong and Zhang, Xiayan and Liu, Yiping and Liang, Nan and Zhang, Meng and Li, Xuelong},
  title = {Mechanical Properties and Failure Mechanisms of Sandstone Influenced by Fracture Dip Angle and Fracture Number},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {13},
  pages = {6352},
  doi = {10.3390/app16136352}
}
Start for free →