EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cutting Tool Wear Condition Monitoring in Milling Using Deep Learning and Data Fusion

Cikala Bagalwa Bienvenu, Kilundu Y’Ebondo Bovic, Katamba Mpoyi Dany, Caterina Casavola, Giovanni Pappalettera

Applied Sciences · 15.06.2026 · 16 (12) · 6063

DOI: 10.3390/app16126063 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 15.06.2026. Verfasst von Cikala Bagalwa Bienvenu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tool wear directly affects surface quality, dimensional accuracy, and manufacturing cost in milling operations, making reliable wear state classification essential for process control. This paper presents an offline deep learning framework for multiclass tool wear classification using the UC Berkeley milling dataset (NASA-Ames). Statistical features are extracted from vibration, acoustic emission, and spindle motor current signals, and dimensionality is reduced from 78 to 9 informative variables using LASSO regression. A four-layer Long Short-Term Memory (LSTM) network then models the temporal evolution of tool degradation across three wear states: healthy, degraded, and failed. Two model variants are compared: Model A uses sensor-derived features only, while Model B additionally incorporates feed rate and depth of cut as inputs. To prevent data leakage, partitioning is performed at the machining-case level rather than at the individual window level. Model A achieves 92% classification accuracy; Model B reaches 95%, demonstrating that cutting conditions provide contextual information that resolves ambiguity between wear states produced under different machining regimes. These results confirm that combining multisensor feature fusion, LASSO-based selection, and sequential deep learning constitutes an effective framework for tool wear classification in milling.

Zitieren

APA

Bienvenu, C. B., Bovic, K. Y., Dany, K. M., Casavola, C., & Pappalettera, G. (2026). Cutting Tool Wear Condition Monitoring in Milling Using Deep Learning and Data Fusion. Applied Sciences, 16(12), 6063. https://doi.org/10.3390/app16126063

Vancouver

Bienvenu CB, Bovic KY, Dany KM, Casavola C, Pappalettera G. Cutting Tool Wear Condition Monitoring in Milling Using Deep Learning and Data Fusion. Applied Sciences. 2026;16(12):6063. doi:10.3390/app16126063

BibTeX
@article{Bienvenu2026,
  author = {Bienvenu, Cikala Bagalwa and Bovic, Kilundu Y’Ebondo and Dany, Katamba Mpoyi and Casavola, Caterina and Pappalettera, Giovanni},
  title = {Cutting Tool Wear Condition Monitoring in Milling Using Deep Learning and Data Fusion},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {12},
  pages = {6063},
  doi = {10.3390/app16126063}
}
Kostenlos starten →