EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tool Wear Monitoring in Robotic Milling Based on a Physics-Informed Data Fusion Model

Chang’an Zhou, Jiarui Yang, Yingchen Yu, Jiabin Hou, Kaixing Zhang, Jiaming Luo, Haijin Wang

Machines · 11.11.2026 · 14 (11) · 1331

DOI: 10.3390/machines14111331 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 11.11.2026. Verfasst von Chang’an Zhou und 6 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shandong Provincial Higher Education Institutions Youth Innovation Team Science and Technology Support Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address tool wear monitoring in industrial robotic milling, a fusion-based monitoring method was proposed. The method was termed the Physics-Informed Transformer–Kolmogorov–Arnold Network (PI-Transformer-KAN). First, a physical mapping model between tool wear and marginal spectral amplitude was established through feature correlation analysis. A coefficient of determination greater than 0.9772 was achieved. Second, the linear layers of the Transformer were replaced with a Kolmogorov–Arnold Network (KAN), allowing the output weights to be dynamically adjusted. Monotonicity constraints were further introduced as a physics-based loss function. This constraint enabled the predicted wear trend to better conform to the actual evolution of tool wear. In addition, physical information and data-driven features were fused using a nonlinear regression network to guide and improve the prediction process. Robotic milling experiments were conducted to evaluate the proposed method. Compared with the data-driven model, the proposed method reduced the root mean square error (RMSE), mean absolute error (MAE), and width of the 95% confidence interval by 30.70%, 28.82%, and 30.08%, respectively.

Förderung

  • National Natural Science Foundation of China
  • Shandong Provincial Higher Education Institutions Youth Innovation Team Science and Technology Support Program

Zitieren

APA

Zhou, C., Yang, J., Yu, Y., Hou, J., Zhang, K., Luo, J., & Wang, H. (2026). Tool Wear Monitoring in Robotic Milling Based on a Physics-Informed Data Fusion Model. Machines, 14(11), 1331. https://doi.org/10.3390/machines14111331

Vancouver

Zhou C, Yang J, Yu Y, Hou J, Zhang K, Luo J, et al. Tool Wear Monitoring in Robotic Milling Based on a Physics-Informed Data Fusion Model. Machines. 2026;14(11):1331. doi:10.3390/machines14111331

BibTeX
@article{Zhou2026,
  author = {Zhou, Chang’an and Yang, Jiarui and Yu, Yingchen and Hou, Jiabin and Zhang, Kaixing and Luo, Jiaming and Wang, Haijin},
  title = {Tool Wear Monitoring in Robotic Milling Based on a Physics-Informed Data Fusion Model},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {11},
  pages = {1331},
  doi = {10.3390/machines14111331}
}
Kostenlos starten →