Improvements in Surface Integrity and Rotating Bending Fatigue Strength of CuZn39Pb3 Brass via a Conventional Diamond-Burnishing Process
Applied Sciences · 02.06.2026 · 16 (11) · 5557
DOI: 10.3390/app16115557 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 02.06.2026. Verfasst von Mariana Ichkova und 5 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund.
Abstract (Originalsprache)
CuZn39Pb3 leaded brass is one of the most widely used alloys in machining. Despite its good machinability, there is a lack of information in the literature on the effects of surface cold working on the surface microhardness, microhardness profile, introduced residual stresses, microstructure, and the operating behaviour of machined components. This article reveals the capabilities of conventional diamond burnishing (DB) (implemented under flood-lubrication conditions) to improve the surface integrity and high- and mega-cycle fatigue strength of CuZn39Pb3 cylindrical components such as axles and shafts. The results show that both the smoothing and hardening DB processes achieve mirror-like surfaces, introduce significant residual compressive stresses at depths greater than 0.5 mm, and significantly increase the fatigue strength in the high- and mega-cycle regions compared to the reference condition (turned and polished specimens). However, the surface microhardness is weakly affected by the degree of surface cold working. Given the almost identical microhardness profiles and the equivalent distribution in depth of the introduced residual stresses by the two DB processes, the possible reason for the more pronounced effect of the hardening process on the fatigue strength lies in the thicker affected layer and the reduced negative skewness introduced by this process.
Förderung
- European Regional Development Fund
Zitieren
APA
Ichkova, M., Anastasov, K., Peneva, P., Ivanova, M., Atanasov, T., & Daskalova, P. (2026). Improvements in Surface Integrity and Rotating Bending Fatigue Strength of CuZn39Pb3 Brass via a Conventional Diamond-Burnishing Process. Applied Sciences, 16(11), 5557. https://doi.org/10.3390/app16115557
Vancouver
Ichkova M, Anastasov K, Peneva P, Ivanova M, Atanasov T, Daskalova P. Improvements in Surface Integrity and Rotating Bending Fatigue Strength of CuZn39Pb3 Brass via a Conventional Diamond-Burnishing Process. Applied Sciences. 2026;16(11):5557. doi:10.3390/app16115557
BibTeX
@article{Ichkova2026,
author = {Ichkova, Mariana and Anastasov, Kalin and Peneva, Petya and Ivanova, Marieta and Atanasov, Tihomir and Daskalova, Petya},
title = {Improvements in Surface Integrity and Rotating Bending Fatigue Strength of CuZn39Pb3 Brass via a Conventional Diamond-Burnishing Process},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {11},
pages = {5557},
doi = {10.3390/app16115557}
}
EUVIMED