Integrated Software Platform for Rapid Prototyping and Validation of Mechatronic ECU Systems Based on a Custom V-Type Model
Applied Sciences · 15.05.2026 · 16 (10) · 4956
DOI: 10.3390/app16104956 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 15.05.2026. Verfasst von Aurel Mihail Titu und 5 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The V-Model is widely used in safety-critical engineering; however, its application to rapid prototyping remains challenging due to limited integration between lifecycle governance and executable validation workflows. This paper addresses end-to-end mechatronic ECU development through the general objective of designing an integrated, prototyping-oriented software platform that operationalizes a V-Model-based rapid prototyping lifecycle with explicit, process-level traceability. Four specific objectives structure the contribution. First, bibliometric analyses of the keywords “V-Model” and “Rapid Prototyping Platforms,” conducted using the Web of Science database and VOSviewer, highlight the limited integration of structured lifecycle approaches with practical prototyping workflows. Second, the V-Model is adapted for mechatronic ECU development by introducing domain-specific decomposition and a dependency-driven testing sequence. Third, the BIOComProP (Basic Input Output Communication Protocol Platform)—comprising reusable ECU firmware, PC based test software, and a dedicated request–response communication protocol—is developed, and its testing capabilities are mapped to V-Model phases. Finally, a logic-based workflow is defined to translate patent derived requirements into executable development and validation steps. The results demonstrate staged verification aligned with technical dependencies, structured traceability across development activities, and firmware reuse across multiple prototypes, offering a coherent and reproducible approach for rapid prototyping of mechatronic ECU systems without relying on heavyweight MBSE or ALM toolchains.
Zitieren
APA
Titu, A. M., Bogorin-Predescu, A., Banciu, D., Marcu, D. F., Florea, B., & Dragomir, M. (2026). Integrated Software Platform for Rapid Prototyping and Validation of Mechatronic ECU Systems Based on a Custom V-Type Model. Applied Sciences, 16(10), 4956. https://doi.org/10.3390/app16104956
Vancouver
Titu AM, Bogorin-Predescu A, Banciu D, Marcu DF, Florea B, Dragomir M. Integrated Software Platform for Rapid Prototyping and Validation of Mechatronic ECU Systems Based on a Custom V-Type Model. Applied Sciences. 2026;16(10):4956. doi:10.3390/app16104956
BibTeX
@article{Titu2026,
author = {Titu, Aurel Mihail and Bogorin-Predescu, Adrian and Banciu, Doina and Marcu, Dragos Florin and Florea, Bogdan and Dragomir, Mihai},
title = {Integrated Software Platform for Rapid Prototyping and Validation of Mechatronic ECU Systems Based on a Custom V-Type Model},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {10},
pages = {4956},
doi = {10.3390/app16104956}
}
EUVIMED