EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

BLE-Based Custom Devices for Indoor Positioning in Ambient Assisted Living Systems: Design and Prototyping

David Díaz-Jiménez iD, José L López Ruiz iD, Juan Carlos Cuevas-Martínez iD, Joaquín Torres-Sospedra iD, Enrique A Navarro iD, Macarena Espinilla Estévez iD

Sensors · 21.10.2025 · 25 (20) · 6499

DOI: 10.3390/s25206499 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 21.10.2025. Verfasst von David Díaz-Jiménez und 5 weiteren Autor:innen. Beteiligte Einrichtung: Computer Science Department, University of Jaén, 23071 Jaén, Spain. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Estatal de Investigación, ERDF A way of making Europe, European Union NextGenerationEU/PRTR.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents the design and prototyping of two reconfigurable BLE-based devices developed to overcome the limitations of commercial platforms in terms of configurability, data transparency, and energy efficiency. The first is a wearable smart wristband integrating inertial and biometric sensors, while the second is a configurable beacon (ASIA Beacon) able to dynamically adjust key transmission parameters such as channel selection and power level. Both devices were engineered with energy-aware components, OTA update support, and flexible 3D-printed enclosures optimized for residential environments. The firmware, developed under Zephyr RTOS, exposes data through standardized interfaces (GATT, MQTT), facilitating their integration into IoT architectures and research-oriented testbeds. Initial experiments carried out in an anechoic chamber demonstrated improved RSSI stability, extended autonomy (up to 4 months for beacons and 3 weeks for the wristband), and reliable real-time data exchange. These results highlight the feasibility and potential of the proposed devices for future deployment in ambient assisted living environments, while the focus of this work remains on the hardware and software development process and its validation.

Schlagwörter

Stichwörter der Autor:innen

GATTZephyr RTOSbluetooth low energyfog computingindoor localizationreconfigurable systemswearable devices

Autor:innen und Institutionen

  • Computer Science Department, University of Jaén, 23071 Jaén, Spain.
  • Telecommunication Engineering Department, University of Jaén, 23700 Linares, Spain.
  • Computer Science Department, University of Valencia, 46010 Valencia, Spain.

ORCID-Profile: David Díaz-Jiménez, José L López Ruiz, Juan Carlos Cuevas-Martínez, Joaquín Torres-Sospedra, Enrique A Navarro, Macarena Espinilla Estévez

Förderung

  • Agencia Estatal de Investigación
  • ERDF A way of making Europe
  • European Union NextGenerationEU/PRTR

Zitieren

APA

Díaz-Jiménez, D., López Ruiz, J. L., Cuevas-Martínez, J. C., Torres-Sospedra, J., Navarro, E. A., & Espinilla Estévez, M. (2025). BLE-Based Custom Devices for Indoor Positioning in Ambient Assisted Living Systems: Design and Prototyping. Sensors, 25(20), 6499. https://doi.org/10.3390/s25206499

Vancouver

Díaz-Jiménez D, López Ruiz JL, Cuevas-Martínez JC, Torres-Sospedra J, Navarro EA, Espinilla Estévez M. BLE-Based Custom Devices for Indoor Positioning in Ambient Assisted Living Systems: Design and Prototyping. Sensors. 2025;25(20):6499. doi:10.3390/s25206499

BibTeX
@article{DazJimnez2025,
  author = {Díaz-Jiménez, David and López Ruiz, José L and Cuevas-Martínez, Juan Carlos and Torres-Sospedra, Joaquín and Navarro, Enrique A and Espinilla Estévez, Macarena},
  title = {BLE-Based Custom Devices for Indoor Positioning in Ambient Assisted Living Systems: Design and Prototyping},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {20},
  pages = {6499},
  doi = {10.3390/s25206499}
}
Kostenlos starten →