EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Annealing Time on FFF-Manufactured PA6 Composites

Lucia Boszorádová, Martin Baráth, Martin Kotus, Vladimír Madola, Jiří Fries

Applied Sciences · 13.04.2026 · 16 (8) · 3791

DOI: 10.3390/app16083791 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 13.04.2026. Verfasst von Lucia Boszorádová und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Research, Development and Youth, Slovakia, Slovak University of Agriculture, Slovakia, Faculty of Engineering of the Slovak University of Agriculture.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on evaluating the effect of annealing time on the mechanical properties and structural changes in polyamide-based materials manufactured using fused filament fabrication (FFF) technology. Three materials were experimentally analysed: neat polyamide PA6, polyamide reinforced with 30% glass fibers (PA6 GF30), and the composite material Onyx. After fabrication, the test specimens were annealed at a temperature of 180 °C for 30, 60, and 100 min. Mechanical properties were evaluated by tensile testing in accordance with ISO 527, and the obtained data were further processed using machine learning methods (Linear SVM, Quadratic SVM, and K-NN) to classify individual levels of thermal exposure. The results showed that annealing significantly improved the tensile strength of Onyx from 50.78 ± 1.46 MPa (0 min) to 60.09 ± 1.30 MPa after 30 min, corresponding to an increase of approximately 18%, while further annealing (60 and 100 min) resulted in values between 59.23 and 62.12 MPa without statistically significant additional improvement. In contrast, PA6 GF30 exhibited a progressive decrease in tensile strength from 76.85 ± 0.87 MPa (0 min) to 51.91 ± 8.03 MPa after 100 min, representing an overall reduction of approximately 32%, indicating degradation of the polymer–fiber interface. For neat PA6, tensile strength decreased from 55.31 ± 3.83 MPa to 40.03 ± 9.36 MPa, but these differences were not statistically significant (p > 0.05). Machine learning classification confirmed predominantly linear material behavior, with Linear SVM achieving accuracies of 85% for Onyx and PA6, and 95% for PA6 GF30, outperforming Quadratic SVM and K-NN models. These findings provide valuable insights for optimizing post-processing conditions of FFF-manufactured polyamide materials and composites.

Förderung

  • Ministry of Education, Research, Development and Youth, Slovakia
  • Slovak University of Agriculture, Slovakia
  • Faculty of Engineering of the Slovak University of Agriculture

Zitieren

APA

Boszorádová, L., Baráth, M., Kotus, M., Madola, V., & Fries, J. (2026). Effect of Annealing Time on FFF-Manufactured PA6 Composites. Applied Sciences, 16(8), 3791. https://doi.org/10.3390/app16083791

Vancouver

Boszorádová L, Baráth M, Kotus M, Madola V, Fries J. Effect of Annealing Time on FFF-Manufactured PA6 Composites. Applied Sciences. 2026;16(8):3791. doi:10.3390/app16083791

BibTeX
@article{Boszordov2026,
  author = {Boszorádová, Lucia and Baráth, Martin and Kotus, Martin and Madola, Vladimír and Fries, Jiří},
  title = {Effect of Annealing Time on FFF-Manufactured PA6 Composites},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {3791},
  doi = {10.3390/app16083791}
}
Kostenlos starten →