EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simultaneous Recycling of PA6 /Carbon Fiber Composite Residues and Ionomer Residues for the Production of PA6 ‐Based Composites: Effect of Processing Route on Properties

Milena R. Silva, Adriana M. C. Souza

Journal of Applied Polymer Science · 09.11.2026

DOI: 10.1002/app.71766 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 09.11.2026. Verfasst von Milena R. Silva und 1 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Conselho Nacional de Desenvolvimento Científico e Tecnológico.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the simultaneous recycling of two polymer residues, polyamide 6/carbon fiber (PA6‐CF) composite residues and ionomer residues, to produce new PA6‐based composites. The influence of the processing route is evaluated by comparing direct injection molding with extrusion followed by injection molding. The composites are characterized for morphology, fiber length, thermal behavior, crystallinity, and mechanical properties. The incorporation of PA6‐CF residues increases the tensile and flexural moduli, tensile and flexural strengths, and heat deflection temperature (HDT), even with a low carbon fiber content of 2.25 wt% and despite fiber shortening during reprocessing. However, the impact strength and elongation at break decrease, a behavior commonly reported for short‐fiber‐reinforced systems. Ionomer residue incorporation reduces stiffness, strength, thermal stability, crystallinity, and HDT, but significantly improves ductility and impact strength, with the composites' impact strength exceeding that of neat PA6. SEM micrographs suggest good fiber–matrix interaction and show a homogeneous carbon fiber dispersion. Although prior extrusion slightly enhances tensile and flexural properties, both processing routes ultimately produce composites with similar overall characteristics. These findings suggest that direct injection molding can serve as a viable alternative that simplifies processing and has the potential to reduce energy consumption and costs.

Förderung

  • Conselho Nacional de Desenvolvimento Científico e Tecnológico

Zitieren

APA

Silva, M. R., & Souza, A. M. C. (2026). Simultaneous Recycling of PA6 /Carbon Fiber Composite Residues and Ionomer Residues for the Production of PA6 ‐Based Composites: Effect of Processing Route on Properties. Journal of Applied Polymer Science. https://doi.org/10.1002/app.71766

Vancouver

Silva MR, Souza AMC. Simultaneous Recycling of PA6 /Carbon Fiber Composite Residues and Ionomer Residues for the Production of PA6 ‐Based Composites: Effect of Processing Route on Properties. Journal of Applied Polymer Science. 2026. doi:10.1002/app.71766

BibTeX
@article{Silva2026,
  author = {Silva, Milena R. and Souza, Adriana M. C.},
  title = {Simultaneous Recycling of PA6 /Carbon Fiber Composite Residues and Ionomer Residues for the Production of PA6 ‐Based Composites: Effect of Processing Route on Properties},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  doi = {10.1002/app.71766}
}
Kostenlos starten →