EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of the Impact of Intensive EDM Regimes on Electrode Wear When Machining C120 Steel Parts

Eugen Herghelegiu, Carol Schnakovszky, Nicolae-Catalin Tampu, Maria-Crina Radu, Bogdan-Alexandru Chirita, Ionel Crinel Raveica, Ionel Olaru, Bogdan Nita, Andrei Zaharia

Applied Sciences · 02.04.2026 · 16 (7) · 3464

DOI: 10.3390/app16073464 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 02.04.2026. Verfasst von Eugen Herghelegiu und 8 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The purpose of any electrode in die-sinking EDM is to transmit electrical impulses that facilitate workpiece erosion with minimum or no self-erosion. The performance of the electrode depends on the properties of the material that it is made of, application, and the workpiece material. This study focused on employing intensive machining regimes that increase productivity while maintaining electrode wear as low as possible to enhance cost-effectiveness. The experimental tests were organized using the response surface method and the analysis of the results is based on the ANOVA method. The findings revealed that the WCu 75/25 outperforms the other two in wear resistance and CuZn39Pb2 is the most wear prone. It was revealed that WCu 75/25 electrode at Ip ≈ 90 A and Ton between 360 and 390 µs represents the globally best solution for a minimum wear.

Zitieren

APA

Herghelegiu, E., Schnakovszky, C., Tampu, N., Radu, M., Chirita, B., Raveica, I. C., Olaru, I., Nita, B., & Zaharia, A. (2026). Investigation of the Impact of Intensive EDM Regimes on Electrode Wear When Machining C120 Steel Parts. Applied Sciences, 16(7), 3464. https://doi.org/10.3390/app16073464

Vancouver

Herghelegiu E, Schnakovszky C, Tampu N, Radu M, Chirita B, Raveica IC, et al. Investigation of the Impact of Intensive EDM Regimes on Electrode Wear When Machining C120 Steel Parts. Applied Sciences. 2026;16(7):3464. doi:10.3390/app16073464

BibTeX
@article{Herghelegiu2026,
  author = {Herghelegiu, Eugen and Schnakovszky, Carol and Tampu, Nicolae-Catalin and Radu, Maria-Crina and Chirita, Bogdan-Alexandru and Raveica, Ionel Crinel and Olaru, Ionel and Nita, Bogdan and Zaharia, Andrei},
  title = {Investigation of the Impact of Intensive EDM Regimes on Electrode Wear When Machining C120 Steel Parts},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {3464},
  doi = {10.3390/app16073464}
}
Kostenlos starten →