Research on Machining Parameter Optimization and an Electrode Wear Compensation Method of Microgroove Micro-EDM
Micromachines · 18.04.2025 · 16 (4) · 481
DOI: 10.3390/mi16040481 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 18.04.2025. Verfasst von Xiaodong Zhang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Ministry of Education Key Laboratory for Cross-Scale Micro and Nano Manufacturing, Changchun University of Science and Technology, 7089 Weixing Road,…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jilin Province Scientific and Technological Development Program.
Abstract (Originalsprache)
In the process of micro-EDM, tool electrode wear is inevitable, especially for complex three-dimensional cavities or microgroove structures. Tool electrode wear accumulates during machining, which will finally affect machining accuracy and machining quality. It is necessary to reduce electrode wear and compensate it through micro-EDM. Therefore, based on an established L27 orthogonal experiment, this paper uses the grey relational analysis (GRA) method to realize multi-objective optimization of machining time and electrode wear, so as to achieve the shortest machining time and the minimum electrode wear during machining under the optimal machining parameter combination. Then, the orthogonal experiment results are used as dataset of artificial neural networks (ANNs), and an ANN prediction model is established. Combined with image processing technology, the bottom profile of the machined microgroove is extracted and then an electrode axial wear compensation equation is fitted, and a fixed-length nonlinear compensation method for electrode axial wear is proposed. Finally, the GRA optimal experiment shows that machining time, electrode axial wear and radial wear are reduced by 13.89%, 3.31%, and 10.80%, respectively, compared with the H17 orthogonal experiment with the largest grey relational grade. For the study of electrode axial wear compensation methods, the consistency of the depth and width of the machined microgroove structure with compensation is significantly better than that of the microgroove structure without compensation. This result shows that the proposed fixed-length nonlinear compensation method can effectively compensate electrode axial wear in micro-EDM and improve machining quality to a certain extent.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Ministry of Education Key Laboratory for Cross-Scale Micro and Nano Manufacturing, Changchun University of Science and Technology, 7089 Weixing Road, Chaoyang District, Changchun 130022, China.
ORCID-Profile: Yiquan Li
Förderung
- Jilin Province Scientific and Technological Development Program
Zitieren
APA
Zhang, X., Zhang, W., Yu, P., & Li, Y. (2025). Research on Machining Parameter Optimization and an Electrode Wear Compensation Method of Microgroove Micro-EDM. Micromachines, 16(4), 481. https://doi.org/10.3390/mi16040481
Vancouver
Zhang X, Zhang W, Yu P, Li Y. Research on Machining Parameter Optimization and an Electrode Wear Compensation Method of Microgroove Micro-EDM. Micromachines. 2025;16(4):481. doi:10.3390/mi16040481
BibTeX
@article{Zhang2025,
author = {Zhang, Xiaodong and Zhang, Wentong and Yu, Peng and Li, Yiquan},
title = {Research on Machining Parameter Optimization and an Electrode Wear Compensation Method of Microgroove Micro-EDM},
journal = {Micromachines},
year = {2025},
volume = {16},
number = {4},
pages = {481},
doi = {10.3390/mi16040481}
}
EUVIMED