Analysis of 3D-Printed Zirconia Implant Overdenture Bars
Applied Sciences · 07.08.2025 · 15 (15) · 8751
DOI: 10.3390/app15158751 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 07.08.2025. Verfasst von Les Kalman und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: American Academy of Implant Dentistry Foundation.
Abstract (Originalsprache)
Dental implant components are typically fabricated using subtractive manufacturing, often involving metal materials that can be costly, inefficient, and time-consuming. This study explores the use of additive manufacturing (AM) with zirconia for dental implant overdenture bars, focusing on mechanical performance, stress distribution, and fit. Solid and lattice-structured bars were designed in Fusion 360 and produced using LithaCon 210 3Y-TZP zirconia (Lithoz GmbH, Vienna, Austria) on a CeraFab 8500 printer. Post-processing included cleaning, debinding, and sintering. A 3D-printed denture was also fabricated to evaluate fit. Thermography and optical imaging were used to assess adaptation. Custom fixtures were developed for flexural testing, and fracture loads were recorded to calculate stress distribution using finite element analysis (ANSYS R2025). The FEA model assumed isotropic, homogeneous, linear-elastic material behavior. Bars were torqued to 15 Ncm on implant analogs. The average fracture loads were 1.2240 kN (solid, n = 12) and 1.1132 kN (lattice, n = 5), with corresponding stress values of 147 MPa and 143 MPa, respectively. No statistically significant difference was observed (p = 0.578; α = 0.05). The fracture occurred near high-stress regions at fixture support points. All bars demonstrated a clinically acceptable fit on the model; however, further validation and clinical evaluation are still needed. Additively manufactured zirconia bars, including lattice structures, show promise as alternatives to conventional superstructures, potentially offering reduced material use and faster production without compromising mechanical performance.
Förderung
- American Academy of Implant Dentistry Foundation
Zitieren
APA
Kalman, L., & Tribst, J. P. M. (2025). Analysis of 3D-Printed Zirconia Implant Overdenture Bars. Applied Sciences, 15(15), 8751. https://doi.org/10.3390/app15158751
Vancouver
Kalman L, Tribst JPM. Analysis of 3D-Printed Zirconia Implant Overdenture Bars. Applied Sciences. 2025;15(15):8751. doi:10.3390/app15158751
BibTeX
@article{Kalman2025,
author = {Kalman, Les and Tribst, João Paulo Mendes},
title = {Analysis of 3D-Printed Zirconia Implant Overdenture Bars},
journal = {Applied Sciences},
year = {2025},
volume = {15},
number = {15},
pages = {8751},
doi = {10.3390/app15158751}
}
EUVIMED