EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Semi‐flooded cooling for high torque density modular permanent magnet machines

W. Zhang, G. J. Li, Z. Q. Zhu, B. Ren, Y. C. Chong

IET Electric Power Applications · 2024-07 · 18 (7) · 756-765

DOI: 10.1049/elp2.12432 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IET Electric Power Applications, 2024-04. Verfasst von W. Zhang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The authors investigate a semi‐flooded cooling technology for modular permanent magnet machines using flux gaps (FGs) in alternate stator teeth for extra cooling channels. The investigated machine is separated into stationary and rotational components by a polyether ether ketone sleeve. Liquid is directed into the stationary component to achieve a significant temperature reduction, at the same time, avoiding the liquid leakage into the rotating component that will cause an increase in friction losses. The FGs in the modular machine increase the contact area between coolant and machine components, resulting in better cooling efficiency. Furthermore, the FGs contribute to reduced pressure loss by minimising system flow resistance. The influence of the FG width on improving machine cooling efficiency, lowering machine temperature, and reducing pressure losses is delved. Additionally, the investigation considers the impact of inlet and outlet areas to reveal the influences stemming from fluid expansions and contractions in these regions. Computational fluid dynamics (CFD) modelling is employed to simulate the cooling performances of the investigated machines. In addition, the flow network analysis has also been employed to help understand the fluid behaviour within machines. A series of tests have been carried out to validate the CFD modelling.

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Zhang, W., Li, G. J., Zhu, Z. Q., Ren, B., & Chong, Y. C. (2024). Semi‐flooded cooling for high torque density modular permanent magnet machines. IET Electric Power Applications, 18(7), 756-765. https://doi.org/10.1049/elp2.12432

Vancouver

Zhang W, Li GJ, Zhu ZQ, Ren B, Chong YC. Semi‐flooded cooling for high torque density modular permanent magnet machines. IET Electric Power Applications. 2024;18(7):756-765. doi:10.1049/elp2.12432

BibTeX
@article{Zhang2024,
  author = {Zhang, W. and Li, G. J. and Zhu, Z. Q. and Ren, B. and Chong, Y. C.},
  title = {Semi‐flooded cooling for high torque density modular permanent magnet machines},
  journal = {IET Electric Power Applications},
  year = {2024},
  volume = {18},
  number = {7},
  pages = {756--765},
  doi = {10.1049/elp2.12432}
}
Kostenlos starten →