EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fatigue-Limit Assessment via Infrared Thermography for a High-Strength Steel

Yingxin Zhao iD, Zhaodong Lin, Yu Xia, Liming Chen, Guoqing Gu iD, Like Pan

Materials · 10.01.2025 · 18 (2) · 279

DOI: 10.3390/ma18020279 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.01.2025. Verfasst von Yingxin Zhao und 5 weiteren Autor:innen. Beteiligte Einrichtung: Standards & Metrology Research Institute, China Academy of Railway Sciences Corporation Limited, Beijing 100010, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, The National Natural Science Foundation of China, Science and Technology Research Project of China Railway Co., Ltd..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Infrared thermography techniques have proven to be very effective for assessing the fatigue limits of metallic materials with obvious temperature variations. But for some materials, it has been shown that the temperature variation is very limited, and the accuracy of infrared thermographic techniques is not verified. In this study, the fatigue properties of a high-strength steel (SAE52100) were evaluated with traditional fatigue-loading techniques and infrared thermographic methods. The traditional fatigue experiments were loaded at a frequency of 80 Hz with a stress ratio of R = −1, and the fatigue limit at the fatigue lifetime of N = 107 cycles was about 800 MPa. Besides, three additional specimens were loaded with step-by-step increasing stress-loading amplitude, where the maximum temperature increments and temperature distribution were recorded via infrared thermographic techniques. The infrared detections revealed that the maximum value of the temperature increase was only about 1 °C. The fatigue limit was first evaluated based on the maximum temperature variation, then the prediction was refined based on fatigue intrinsic dissipation. The fatigue limits predicted with maximum temperature variation were shown to be 841 MPa, 772 MPa, and 787 MPa, respectively, while the fatigue limits predicted based on fatigue intrinsic dissipation were 793 MPa, 791 MPa, and 789 MPa. Finally, an FEM simulation of temperature variation during fatigue loading was implemented to verify the experimental results. This study provides a solid foundation for the applications of infrared thermography techniques for materials with lower energy dissipations.

Schlagwörter

Stichwörter der Autor:innen

fatigue limithigh-cycle fatigueinfrared thermographyintrinsic dissipationtemperature variation

Autor:innen und Institutionen

  • Standards & Metrology Research Institute, China Academy of Railway Sciences Corporation Limited, Beijing 100010, China.
  • College of Civil Engineering, Nanjing Tech University, Nanjing 211816, China.
  • College of Civil Engineering, Yancheng Institute of Technology, Yancheng 224051, China.

ORCID-Profile: Yingxin Zhao, Guoqing Gu

Förderung

  • National Natural Science Foundation of China
  • The National Natural Science Foundation of China
  • Science and Technology Research Project of China Railway Co., Ltd.

Zitieren

APA

Zhao, Y., Lin, Z., Xia, Y., Chen, L., Gu, G., & Pan, L. (2025). Fatigue-Limit Assessment via Infrared Thermography for a High-Strength Steel. Materials, 18(2), 279. https://doi.org/10.3390/ma18020279

Vancouver

Zhao Y, Lin Z, Xia Y, Chen L, Gu G, Pan L. Fatigue-Limit Assessment via Infrared Thermography for a High-Strength Steel. Materials. 2025;18(2):279. doi:10.3390/ma18020279

BibTeX
@article{Zhao2025,
  author = {Zhao, Yingxin and Lin, Zhaodong and Xia, Yu and Chen, Liming and Gu, Guoqing and Pan, Like},
  title = {Fatigue-Limit Assessment via Infrared Thermography for a High-Strength Steel},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {2},
  pages = {279},
  doi = {10.3390/ma18020279}
}
Kostenlos starten →