EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Rapid Tooling for Microinjection Moulding of Proof-of-Concept Microfluidic Device: Resin Insert Capability and Preliminary Validation

Benedetta Stampone, Kudret Irem Deniz, Alessia Foscarini, Antonio Turco, Maria Serena Chiriacò, Francesco Ferrara, Luca Giorleo, Gianluca Trotta

Applied Sciences · 09.04.2024 · 14 (8) · 3157

DOI: 10.3390/app14083157 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 09.04.2024. Verfasst von Benedetta Stampone und 7 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Producing sustainable microfluidic devices on a large scale has become a trend in the biomedical field. However, the transition from laboratory prototyping to large-scale industrial production poses several challenges due to the gap between academia and industry. In this context, prototyping with a mass production approach could be the novel strategy necessary to bridge academic research to the market. Here, the performance of polymer inserts to produce PMMA microfluidic devices using the microinjection moulding process is presented. Inserts were fabricated with an additive manufacturing process: material jetting technology. The importance of the inserts’ orientation on the printing plate in order to produce samples with more uniform thickness and lower roughness has been demonstrated using a flat cavity insert. In addition, preliminary tests were carried out on microstructured inserts with inverted channels of various cross-section shapes (semi-circular or trapezoidal) and widths (200 or 300 µm) in order to investigate the microstructures’ resistance during the moulding cycles. The best geometry was found in the channel with the trapezoidal cross-section with a width equal to 300 µm. Finally, a preliminary microfluidic test was performed to demonstrate the devices’ workability.

Förderung

  • Ministry of University

Zitieren

APA

Stampone, B., Deniz, K. I., Foscarini, A., Turco, A., Chiriacò, M. S., Ferrara, F., Giorleo, L., & Trotta, G. (2024). Rapid Tooling for Microinjection Moulding of Proof-of-Concept Microfluidic Device: Resin Insert Capability and Preliminary Validation. Applied Sciences, 14(8), 3157. https://doi.org/10.3390/app14083157

Vancouver

Stampone B, Deniz KI, Foscarini A, Turco A, Chiriacò MS, Ferrara F, et al. Rapid Tooling for Microinjection Moulding of Proof-of-Concept Microfluidic Device: Resin Insert Capability and Preliminary Validation. Applied Sciences. 2024;14(8):3157. doi:10.3390/app14083157

BibTeX
@article{Stampone2024,
  author = {Stampone, Benedetta and Deniz, Kudret Irem and Foscarini, Alessia and Turco, Antonio and Chiriacò, Maria Serena and Ferrara, Francesco and Giorleo, Luca and Trotta, Gianluca},
  title = {Rapid Tooling for Microinjection Moulding of Proof-of-Concept Microfluidic Device: Resin Insert Capability and Preliminary Validation},
  journal = {Applied Sciences},
  year = {2024},
  volume = {14},
  number = {8},
  pages = {3157},
  doi = {10.3390/app14083157}
}
Kostenlos starten →