Optimization of Redundant Degrees of Freedom in Robotic Flat-End Milling Based on Dynamic Response
Applied Sciences · 25.02.2024 · 14 (5) · 1877
DOI: 10.3390/app14051877 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 25.02.2024. Verfasst von Jinyu Liu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Postdoctoral Science Foundation, National Key Research and Development Program of China for Robotics Serialized Harmonic Reducer Fatigue Performance Analysis and Prediction and Life Enhancemen….
Abstract (Originalsprache)
With the advantages of large working space, low cost and more flexibility, industrial robots have become an important carrier in intelligent manufacturing. Due to the low rigidity of robotic milling systems, cutting vibrations are inevitable and have a significant impact on surface quality and machining accuracy. To improve the machining performance of the robot, a posture optimization approach based on the dynamic response index is proposed, which combines posture-dependent dynamic characteristics with surface quality for robotic milling. First, modal tests are conducted at sampled points to estimate the posture-dependent dynamic parameters of the robotic milling system. The modal parameters at the unsampled points are further predicted using the inverse distance weighted method. By combining posture-independent modal parameters with calibrating the cutting forces, a dynamic model of a robotic milling system is established and solved with a semi-discretization method. A dynamic response index is then introduced, calculated based on the extraction of the vibration signal peaks. The optimization model is validated through milling experiments, demonstrating that optimizing redundant angles significantly enhances milling stability and quality.
Förderung
- China Postdoctoral Science Foundation
- National Key Research and Development Program of China for Robotics Serialized Harmonic Reducer Fatigue Performance Analysis and Prediction and Life Enhancemen…
Zitieren
APA
Liu, J., Zhao, Y., Niu, Y., Cao, J., Zhang, L., & Zhao, Y. (2024). Optimization of Redundant Degrees of Freedom in Robotic Flat-End Milling Based on Dynamic Response. Applied Sciences, 14(5), 1877. https://doi.org/10.3390/app14051877
Vancouver
Liu J, Zhao Y, Niu Y, Cao J, Zhang L, Zhao Y. Optimization of Redundant Degrees of Freedom in Robotic Flat-End Milling Based on Dynamic Response. Applied Sciences. 2024;14(5):1877. doi:10.3390/app14051877
BibTeX
@article{Liu2024,
author = {Liu, Jinyu and Zhao, Yiyang and Niu, Yuqin and Cao, Jiabin and Zhang, Lin and Zhao, Yanzheng},
title = {Optimization of Redundant Degrees of Freedom in Robotic Flat-End Milling Based on Dynamic Response},
journal = {Applied Sciences},
year = {2024},
volume = {14},
number = {5},
pages = {1877},
doi = {10.3390/app14051877}
}
EUVIMED