EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Interaction between Local Shielding Gas Supply and Laser Spot Size on Spatter Formation in Laser Beam Welding of AISI 304

Christian Diegel, Thorsten Mattulat, Klaus Schricker, Leander Schmidt, Thomas Seefeld, Jean Pierre Bergmann, Peer Woizeschke

Applied Sciences · 20.09.2023 · 13 (18) · 10507

DOI: 10.3390/app131810507 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 20.09.2023. Verfasst von Christian Diegel und 6 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Association for Steel Application (FOSTA) and the Federal Ministry of Economic Affairs and Climate Action.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Spatter formation at melt pool swellings at the keyhole rear wall is a major issue for laser deep penetration welding at speeds beyond 8 m/min. A gas nozzle directed towards the keyhole, that supplies shielding gas locally, is advantageous in reducing spatter formation due to its simple utilization. However, the relationship between local gas flow, laser spot size, and the resulting effects on spatter formation at high welding speeds up to 16 m/min are not yet fully understood.

Methods

The high-alloy steel AISI 304 (1.4301/X5CrNi18-10) was welded with laser spot sizes of 300 μm and 600 μm while using a specially designed gas nozzle directed to the keyhole. Constant welding depth was ensured by Optical Coherence Tomography (OCT). Spatter formation was evaluated by precision weighing of samples. Subsequent processing of high-speed images was used to evaluate spatter quantity, size, and velocity. The keyhole oscillation was determined by Fast Fourier Transform (FFT) analysis. Tracking the formation of melt pool swellings at the keyhole rear wall provided information on the upward melt flow velocity.

Results

The local gas flow enabled a significant reduction in the number of spatters and loss of mass for both laser spot sizes and indicated an effect on surface tension by shielding the processing zone from the ambient atmosphere. The laser spot size affected the upward melt flow velocity and spatter velocity.

Förderung

  • Research Association for Steel Application (FOSTA) and the Federal Ministry of Economic Affairs and Climate Action

Zitieren

APA

Diegel, C., Mattulat, T., Schricker, K., Schmidt, L., Seefeld, T., Bergmann, J. P., & Woizeschke, P. (2023). Interaction between Local Shielding Gas Supply and Laser Spot Size on Spatter Formation in Laser Beam Welding of AISI 304. Applied Sciences, 13(18), 10507. https://doi.org/10.3390/app131810507

Vancouver

Diegel C, Mattulat T, Schricker K, Schmidt L, Seefeld T, Bergmann JP, et al. Interaction between Local Shielding Gas Supply and Laser Spot Size on Spatter Formation in Laser Beam Welding of AISI 304. Applied Sciences. 2023;13(18):10507. doi:10.3390/app131810507

BibTeX
@article{Diegel2023,
  author = {Diegel, Christian and Mattulat, Thorsten and Schricker, Klaus and Schmidt, Leander and Seefeld, Thomas and Bergmann, Jean Pierre and Woizeschke, Peer},
  title = {Interaction between Local Shielding Gas Supply and Laser Spot Size on Spatter Formation in Laser Beam Welding of AISI 304},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {18},
  pages = {10507},
  doi = {10.3390/app131810507}
}
Kostenlos starten →