EUVIMEDEUVIMED entdecken
Crossref

OPTIMIZATION OF LASER SPOT WELDING PARAMETERS FOR 304 STAINLESS STEEL THIN SHEETS USING NUMERICAL SIMULATION

Jin Peng, Junhai Xia, Shihua Xie, Jie Chen, Lei Zhang, Yongtao Jiu, Yujia Li, Xiaokai Yu, Xiangyun Zhang, Nannan Chen

Materiali in tehnologije · 02.04.2026 · 60 (2)

DOI: 10.17222/mit.2025.1475 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materiali in tehnologije, online erschienen am 02.04.2026. Verfasst von Jin Peng und 9 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser spot welding of stainless steel is widely used for connecting vehicle body structures and electronic components. In this study, numerical simulation of laser spot welding was conducted on lap joints of 304 austenitic stainless steel thin plates measuring 120 × 80 × 0.8 mm. The equivalent stress and total deformation of the welded joints under different welding sequences and fixture clamping forces were investigated, and the stress and deformation around the weld spots were characterized. The results demonstrate that at a laser power of 1300 W, the equivalent stress after welding with the sequence (1-4-3-6-2-5) reaches a minimum value of the maximum equivalent stress of 421.87 MPa, indicating the optimal welding sequence. Under the optimal welding sequence, when the clamping forces on both sides are 100 N, the equivalent stress and total deformation reach the lowest values of 421.87 MPa and 0.27 mm, respectively, representing the optimal fixture clamping forces. These findings provide guidance for optimizing the laser spot welding process in industrial applications.

Zitieren

APA

Peng, J., Xia, J., Xie, S., Chen, J., Zhang, L., Jiu, Y., Li, Y., Yu, X., Zhang, X., & Chen, N. (2026). OPTIMIZATION OF LASER SPOT WELDING PARAMETERS FOR 304 STAINLESS STEEL THIN SHEETS USING NUMERICAL SIMULATION. Materiali in tehnologije, 60(2). https://doi.org/10.17222/mit.2025.1475

Vancouver

Peng J, Xia J, Xie S, Chen J, Zhang L, Jiu Y, et al. OPTIMIZATION OF LASER SPOT WELDING PARAMETERS FOR 304 STAINLESS STEEL THIN SHEETS USING NUMERICAL SIMULATION. Materiali in tehnologije. 2026;60(2). doi:10.17222/mit.2025.1475

BibTeX
@article{Peng2026,
  author = {Peng, Jin and Xia, Junhai and Xie, Shihua and Chen, Jie and Zhang, Lei and Jiu, Yongtao and Li, Yujia and Yu, Xiaokai and Zhang, Xiangyun and Chen, Nannan},
  title = {OPTIMIZATION OF LASER SPOT WELDING PARAMETERS FOR 304 STAINLESS STEEL THIN SHEETS USING NUMERICAL SIMULATION},
  journal = {Materiali in tehnologije},
  year = {2026},
  volume = {60},
  number = {2},
  doi = {10.17222/mit.2025.1475}
}
Kostenlos starten →