EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

WASPAS Based Multi Response Optimization in Hard Turning of AISI 52100 Steel under ZnO Nanofluid Assisted Dual Nozzle Pulse-MQL Environment

Saswat Khatai, Ramanuj Kumar, Amlana Panda, Ashok Kumar Sahoo

Applied Sciences · 06.09.2023 · 13 (18) · 10062

DOI: 10.3390/app131810062 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 06.09.2023. Verfasst von Saswat Khatai und 3 weiteren Autor:innen. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hard turning is an emerging machining technology that evolved as a substitute for grinding in the production of precision parts from hardened steel. It offers advantages such as reduced cycle times, lower costs, and environmental benefits over grinding. Hard turning is stated to be difficult because of the high hardness of the workpiece material, which causes higher tool wear, cutting temperature, surface roughness, and cutting force. In this work, a dual-nozzle minimum quantity lubrication (MQL) system’s performance assessment of ZnO nano-cutting fluid in the hard turning of AISI 52100 bearing steel is examined. The objective is to evaluate the ZnO nano-cutting fluid’s impacts on flank wear, surface roughness, cutting temperature, cutting power consumption, and cutting noise. The tool flank wear was traced to be very low (0.027 mm to 0.095 mm) as per the hard turning concern. Additionally, the data acquired are statistically analyzed using main effects plots, interaction plots, and analysis of variance (ANOVA). Moreover, a novel Weighted Aggregated Sum Product Assessment (WASPAS) optimization tool was implemented to select the optimal combination of input parameters. The following optimal input variables were found: depth of cut = 0.3 mm, feed = 0.05 mm/rev, cutting speed = 210 m/min, and flow rate = 50 mL/hr.

Zitieren

APA

Khatai, S., Kumar, R., Panda, A., & Sahoo, A. K. (2023). WASPAS Based Multi Response Optimization in Hard Turning of AISI 52100 Steel under ZnO Nanofluid Assisted Dual Nozzle Pulse-MQL Environment. Applied Sciences, 13(18), 10062. https://doi.org/10.3390/app131810062

Vancouver

Khatai S, Kumar R, Panda A, Sahoo AK. WASPAS Based Multi Response Optimization in Hard Turning of AISI 52100 Steel under ZnO Nanofluid Assisted Dual Nozzle Pulse-MQL Environment. Applied Sciences. 2023;13(18):10062. doi:10.3390/app131810062

BibTeX
@article{Khatai2023,
  author = {Khatai, Saswat and Kumar, Ramanuj and Panda, Amlana and Sahoo, Ashok Kumar},
  title = {WASPAS Based Multi Response Optimization in Hard Turning of AISI 52100 Steel under ZnO Nanofluid Assisted Dual Nozzle Pulse-MQL Environment},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {18},
  pages = {10062},
  doi = {10.3390/app131810062}
}
Kostenlos starten →