EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A study on mechanisms of saw-tooth chip formation in hard turning under hybrid nanofluid-assisted MQL environment

Tran Minh Duc, Tran Bao Ngoc, Ngo Minh Tuan, Dang Thi Huyen Trang, Tran The Long

Advances in Mechanical Engineering · 2024-10 · 16 (10)

DOI: 10.1177/16878132241289286 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Mechanical Engineering, online erschienen am 29.10.2024. Verfasst von Tran Minh Duc und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Saw-tooth chip generated from hard turning is one of the most distinguishing features with conventional turning process. The presented work aims to contribute an extensive understanding the formation mechanism and main parameters of saw-tooth chips in oblique hard turning of 90CrSi hardened tool steel (60–62 HRC). The effects of dry, Al 2 O 3 nanofluid MQL, Al 2 O 3 /MoS 2 hybrid nanofluid MQL conditions on the serrated chip formation were experimentally investigated in terms of chip morphology, chip color, segment spacing, serrated segmentation frequency, and shear angle. The obtained experimental results indicated that, due to the better cooling and lubricating performance of nanofluid and hybrid nanofluid, the shear angles ϕ increase about 91.73% and 94.88% respectively when compared to dry cutting, which makes the formation of saw-tooth chip more favorable. Moreover, the analysis of microstructure image of the back side of chip proves the better lubrication from ball roller and tribo-film formation of Al 2 O 3 and MoS 2 nanoparticles. Based on the chip morphology analysis, the shear angle ϕ, the degree of chip segmentation on the top side in the chip’s transverse section K 2 , and the chip deformation coefficient in the transverse section K 3 should be used as the additional criterions to evaluate the frictional improvement in cutting zone.

Zitieren

APA

Duc, T. M., Ngoc, T. B., Tuan, N. M., Trang, D. T. H., & Long, T. T. (2024). A study on mechanisms of saw-tooth chip formation in hard turning under hybrid nanofluid-assisted MQL environment. Advances in Mechanical Engineering, 16(10). https://doi.org/10.1177/16878132241289286

Vancouver

Duc TM, Ngoc TB, Tuan NM, Trang DTH, Long TT. A study on mechanisms of saw-tooth chip formation in hard turning under hybrid nanofluid-assisted MQL environment. Advances in Mechanical Engineering. 2024;16(10). doi:10.1177/16878132241289286

BibTeX
@article{Duc2024,
  author = {Duc, Tran Minh and Ngoc, Tran Bao and Tuan, Ngo Minh and Trang, Dang Thi Huyen and Long, Tran The},
  title = {A study on mechanisms of saw-tooth chip formation in hard turning under hybrid nanofluid-assisted MQL environment},
  journal = {Advances in Mechanical Engineering},
  year = {2024},
  volume = {16},
  number = {10},
  doi = {10.1177/16878132241289286}
}
Kostenlos starten →