EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Through-Thickness Inhomogeneity of Microstructures and Mechanical Properties in an As-Quenched Thin Specification High Strength NM450TP Steel Plate

Guannan Li, Shuqing Lu, Jie Ren, Zheng Zhou

Applied Sciences · 10.06.2023 · 13 (12) · 7017

DOI: 10.3390/app13127017 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 10.06.2023. Verfasst von Guannan Li und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: key scientific project of Hebei Iron and Steel Group Co., Ltd..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The inhomogeneity of microstructures and mechanical properties in an as-quenched thin specification NM450TP wear-resistant steel plate were quantitatively investigated. The results show that the microstructures exhibit inhomogeneous distribution through the thickness and the area percentage of martensite and ferrite grains varies regularly through the thickness, and the content of ferrite on the top surface of the plate is found to be two times that of ferrite at the core location and more than that of ferrite at the bottom surface. In addition, the steel plate exhibits the obvious anisotropy of tensile properties, the tensile strength paralleling to the rolling direction is lower than that along the transverse direction while the elongation paralleling to the rolling direction is better than that along the transverse direction. The result indicates that the deformation degree of prior austenite grains during hot rolling and the content of martensite after quenching dominate the mechanical properties while the ferrite content is not the main factor affecting the plasticity. The findings provide experimental evidences and lay a theoretical foundation for analyzing the subsequent processing.

Förderung

  • key scientific project of Hebei Iron and Steel Group Co., Ltd.

Zitieren

APA

Li, G., Lu, S., Ren, J., & Zhou, Z. (2023). Through-Thickness Inhomogeneity of Microstructures and Mechanical Properties in an As-Quenched Thin Specification High Strength NM450TP Steel Plate. Applied Sciences, 13(12), 7017. https://doi.org/10.3390/app13127017

Vancouver

Li G, Lu S, Ren J, Zhou Z. Through-Thickness Inhomogeneity of Microstructures and Mechanical Properties in an As-Quenched Thin Specification High Strength NM450TP Steel Plate. Applied Sciences. 2023;13(12):7017. doi:10.3390/app13127017

BibTeX
@article{Li2023,
  author = {Li, Guannan and Lu, Shuqing and Ren, Jie and Zhou, Zheng},
  title = {Through-Thickness Inhomogeneity of Microstructures and Mechanical Properties in an As-Quenched Thin Specification High Strength NM450TP Steel Plate},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {12},
  pages = {7017},
  doi = {10.3390/app13127017}
}
Kostenlos starten →