EUVIMEDEUVIMED entdecken
Crossref

Through‐Thickness Inhomogeneity on Microstructure, Mechanical Properties, and Corrosion Resistance of Al–Cu–Li Alloy Thick Plate

Congcong Zhu, Kun He, Guoling Mao, Dongyang Liu, Zhongwu Li, Wenli Gao

Advanced Engineering Materials · 03.06.2026 · 28 (11)

DOI: 10.1002/adem.202502294 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 17.03.2026. Verfasst von Congcong Zhu und 5 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Gefördert von: Fundamental Research Funds for Central Universities of the Central South University, Natural Science Foundation of Jiangsu Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The relationship between mechanical properties, corrosion resistance, and microstructure inhomogeneity along the thickness direction of an aerospace‐grade Al–Cu–Li alloy thick plates were evaluated. The results showed a progressive enhancement in mechanical properties from surface layer through T/4 layer and then to T/2 layer. The strength increased from 578 MPa to 607.7 MPa and then to 649.7 MPa. The IGC degree of Al–Cu–Li alloy thick plates decreased gradually from the surface layer to T/2 layer. The texture at the surface layer mainly consisted of recrystallization texture, shear texture, and a small amount of deformation texture. The texture at the T/2 layer was mainly the deformation texture. The main precipitation phase of the alloy after T86 aging was T 1 phase, with small amounts of θ’ and δ’ phases. A distinct density gradient of T 1 phase was observed along the thickness, progressively increasing from surface layer to T/4 layer and reaching maximum in T/2 layer. The combined effect of texture characteristics and aging precipitates, the mechanical properties, and corrosion resistance of T/2 layer were better than surface layer.

Förderung

  • Fundamental Research Funds for Central Universities of the Central South University
  • Natural Science Foundation of Jiangsu Province

Zitieren

APA

Zhu, C., He, K., Mao, G., Liu, D., Li, Z., & Gao, W. (2026). Through‐Thickness Inhomogeneity on Microstructure, Mechanical Properties, and Corrosion Resistance of Al–Cu–Li Alloy Thick Plate. Advanced Engineering Materials, 28(11). https://doi.org/10.1002/adem.202502294

Vancouver

Zhu C, He K, Mao G, Liu D, Li Z, Gao W. Through‐Thickness Inhomogeneity on Microstructure, Mechanical Properties, and Corrosion Resistance of Al–Cu–Li Alloy Thick Plate. Advanced Engineering Materials. 2026;28(11). doi:10.1002/adem.202502294

BibTeX
@article{Zhu2026,
  author = {Zhu, Congcong and He, Kun and Mao, Guoling and Liu, Dongyang and Li, Zhongwu and Gao, Wenli},
  title = {Through‐Thickness Inhomogeneity on Microstructure, Mechanical Properties, and Corrosion Resistance of Al–Cu–Li Alloy Thick Plate},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {11},
  doi = {10.1002/adem.202502294}
}
Kostenlos starten →