EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties of NiTi Rotary Files Fabricated through Gold-Wire, CM-Wire, T-Wire, and R-Phase Heat Treatment

Soram Oh, Tae-Hwan Kim, Seok Woo Chang

Applied Sciences · 11.03.2023 · 13 (6) · 3604

DOI: 10.3390/app13063604 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 11.03.2023. Verfasst von Soram Oh und 2 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of the Republic of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Although nickel–titanium (NiTi) rotary files are invaluable tools in dentistry, the relationship between their properties and performance has not been elucidated. Herein, the performance of gold heat-treated (ProTaper Gold and ProfaTaper Gold), controlled memory (CM)-wire (HyFlex CM and V Taper 2H), T-wire (2Shape), and R-phase heat-treated (K3XF) NiTi files was evaluated; the non-heat-treated ProFile was used as the control. The bending, buckling, cyclic fatigue, and torsional resistances of the NiTi files were determined, and their phase transformation behavior was studied through differential scanning calorimetry (DSC). The angle of rotation until fracture (ARF), ultimate torsional strength (UTS), and stiffness were evaluated via torsional resistance testing. One-way analysis of variance (ANOVA) and post hoc analyses were conducted using the Games–Howell test and Tukey’s test. ProFile displayed the highest buckling resistance (8 N), CM-wire NiTi files exhibited the lowest bending resistance (0.660–0.758 N cm), and HyFlex CM displayed the highest cyclic fatigue resistance. ProTaper Gold exhibited high UTS and low ARF. K3XF demonstrated high bending resistance and the lowest cyclic fatigue resistance. The CM-wire NiTi files were the most suitable for use in curved canals, while the gold-wire NiTi files were ideal for constricted canals. ProFile was recommended for use in re-treatment cases.

Förderung

  • National Research Foundation of the Republic of Korea

Zitieren

APA

Oh, S., Kim, T., & Chang, S. W. (2023). Mechanical Properties of NiTi Rotary Files Fabricated through Gold-Wire, CM-Wire, T-Wire, and R-Phase Heat Treatment. Applied Sciences, 13(6), 3604. https://doi.org/10.3390/app13063604

Vancouver

Oh S, Kim T, Chang SW. Mechanical Properties of NiTi Rotary Files Fabricated through Gold-Wire, CM-Wire, T-Wire, and R-Phase Heat Treatment. Applied Sciences. 2023;13(6):3604. doi:10.3390/app13063604

BibTeX
@article{Oh2023,
  author = {Oh, Soram and Kim, Tae-Hwan and Chang, Seok Woo},
  title = {Mechanical Properties of NiTi Rotary Files Fabricated through Gold-Wire, CM-Wire, T-Wire, and R-Phase Heat Treatment},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {6},
  pages = {3604},
  doi = {10.3390/app13063604}
}
Kostenlos starten →