EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and Numerical Predictions of Cryogenic Leakages in Welded Steel Plates

Dong Kang, Le Dai, Ki-Beom Park, Young-Hwan Choi, Jeong-Hyeon Kim, Seul-Kee Kim, Jae-Myung Lee

Applied Sciences · 28.02.2023 · 13 (5) · 3132

DOI: 10.3390/app13053132 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 28.02.2023. Verfasst von Dong Kang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Energy Technology Evaluation and Planning (KETEP), Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea, Ministry of Oceans and Fisheries.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presented experimental and numerical research to investigate the effect of cryogenic leakage on a plate structure of AH36-grade steel containing welded joints. To simulate the cryogenic leakage conditions, the welded plate was exposed to a temperature of −196 °C by supplying liquid nitrogen (LN2) to the center of the steel plate. The time-dependent temperature history and strain variation were measured by using thermocouples and strain gauges attached to the plate surface. Additionally, the residual stress of the middle surface section before and after the cryogenic leakage process was measured by X-ray diffraction analysis (XRD). A three-dimensional finite element model was created with the use of a commercial finite element analysis (FEA) program to simulate the flux-cored arc welding process and cryogenic leakage process. The steel surface temperature dropped sharply and reached approximately −196 °C at 160 s after LN2 supplement. After the first 650 s of the LN2 leakage experiment, the outside of the trough reached approximately −75 °C and −25 °C, depending on the location of the thermal couples. Although there was a relative difference in the results, the experiment and numerical simulation results for temperature and stress distribution showed good agreement. The results could be utilized in the ship design stage adopting welded structures as a basic database.

Förderung

  • Korea Institute of Energy Technology Evaluation and Planning (KETEP)
  • Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea
  • Ministry of Oceans and Fisheries
  • Ministry of Trade, Industry & Energy (MOTIE, Korea)

Zitieren

APA

Kang, D., Dai, L., Park, K., Choi, Y., Kim, J., Kim, S., & Lee, J. (2023). Experimental and Numerical Predictions of Cryogenic Leakages in Welded Steel Plates. Applied Sciences, 13(5), 3132. https://doi.org/10.3390/app13053132

Vancouver

Kang D, Dai L, Park K, Choi Y, Kim J, Kim S, et al. Experimental and Numerical Predictions of Cryogenic Leakages in Welded Steel Plates. Applied Sciences. 2023;13(5):3132. doi:10.3390/app13053132

BibTeX
@article{Kang2023,
  author = {Kang, Dong and Dai, Le and Park, Ki-Beom and Choi, Young-Hwan and Kim, Jeong-Hyeon and Kim, Seul-Kee and Lee, Jae-Myung},
  title = {Experimental and Numerical Predictions of Cryogenic Leakages in Welded Steel Plates},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {5},
  pages = {3132},
  doi = {10.3390/app13053132}
}
Kostenlos starten →