EUVIMEDEUVIMED entdecken
Crossref

Numerical and experimental optimization of welded stainless-steel liners for lightweight road tanks

Hichem Aberbache, Alexandre Mathieu, Rodolphe Bolot, Laurent Bleurvacq, Axel Corolleur, Fabrice Laurent

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications · 07.05.2026

DOI: 10.1177/14644207261439770 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, online erschienen am 07.05.2026. Verfasst von Hichem Aberbache und 5 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Gefördert von: ADEME.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of this work is to reduce the weight of road tanks by decreasing the thickness of the metal sheets and optimizing the welding processes used in their assembly. In order to achieve this objective, the approach is to reinforce the mechanically welded stainless-steel liner with a fiber-resin composite filament winding, which will be investigated in future work. Thus, the thickness of the tank's liner was reduced from 3 mm to 1 mm, resulting in a mass reduction of 500 and 1000 kg per tank. This corresponds to a potential increase in the mass of fluid that can be transported and also leads to lower fuel consumption and CO 2 emissions per ton of transported fluid. Importantly, all these benefits were achieved without compromising structural rigidity or durability. The liner was manufactured using a combination of Gas Tungsten Arc Welding (GTAW) and Gas Metal Arc Welding (GMAW) in Cold Metal Transfer (CMT) mode. Three-dimensional scanning measurement campaigns were used to record displacements and geometric defects, such as cylindricity, during the construction of a one-quarter-scale cylindrical tank prototype. The collected data were then compared with the welding-induced distortions calculated by an optimized numerical model designed to provide a reliable response with reduced computation time. Consequently, the present model facilitates the prediction of mechanical strains and stresses while reducing computational time by almost a factor of 10 compared to conventional transient thermo-mechanical simulations.

Förderung

  • ADEME

Zitieren

APA

Aberbache, H., Mathieu, A., Bolot, R., Bleurvacq, L., Corolleur, A., & Laurent, F. (2026). Numerical and experimental optimization of welded stainless-steel liners for lightweight road tanks. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. https://doi.org/10.1177/14644207261439770

Vancouver

Aberbache H, Mathieu A, Bolot R, Bleurvacq L, Corolleur A, Laurent F. Numerical and experimental optimization of welded stainless-steel liners for lightweight road tanks. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2026. doi:10.1177/14644207261439770

BibTeX
@article{Aberbache2026,
  author = {Aberbache, Hichem and Mathieu, Alexandre and Bolot, Rodolphe and Bleurvacq, Laurent and Corolleur, Axel and Laurent, Fabrice},
  title = {Numerical and experimental optimization of welded stainless-steel liners for lightweight road tanks},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications},
  year = {2026},
  doi = {10.1177/14644207261439770}
}
Kostenlos starten →