Thermomechanical Stresses in Silicon Chips for Optoelectronic Devices
Applied Sciences · 20.02.2023 · 13 (4) · 2737
DOI: 10.3390/app13042737 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 20.02.2023. Verfasst von Claudia Mezzalira und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Chemical Sciences of the University of Padova.
Abstract (Originalsprache)
The growing interest in improving optoelectronic devices requires continuous research of the materials and processes involved in manufacturing. From a chemical point of view, the study of this sector is crucial to optimize existing manufacturing processes or create new ones. This work focusses on the experimental evaluation of residual stresses on samples that are intended to simulate part of the structure of an optoelectronic device. It represents an important starting point for the development of optoelectronic devices with characteristics suitable for future industrial production. Silicon chips, with a thickness of 120 μm, were soldered onto copper and alumina substrates, using different assembly parameters in terms of temperature and pressure. Using Raman spectroscopy, the stress evaluation was estimated in a wide temperature range, from −50 to 180 °C. Silicon chips soldered with AuSn alloy on copper substrates demonstrated at 22 °C a compressive stress, developed in the center of the assembly with a maximum value of −600 MPa, which reached −1 GPa at low temperatures. They present a stress distribution with a symmetric profile with respect to the central area of the chip. The silicon chip assembled on a ceramic substrate without pressure turned out to be extremely interesting. Even in the absence of pressure, the sample did not show a large shift in the Raman position, indicating a low stress.
Förderung
- Department of Chemical Sciences of the University of Padova
Zitieren
APA
Mezzalira, C., Conti, F., Pedron, D., & Signorini, R. (2023). Thermomechanical Stresses in Silicon Chips for Optoelectronic Devices. Applied Sciences, 13(4), 2737. https://doi.org/10.3390/app13042737
Vancouver
Mezzalira C, Conti F, Pedron D, Signorini R. Thermomechanical Stresses in Silicon Chips for Optoelectronic Devices. Applied Sciences. 2023;13(4):2737. doi:10.3390/app13042737
BibTeX
@article{Mezzalira2023,
author = {Mezzalira, Claudia and Conti, Fosca and Pedron, Danilo and Signorini, Raffaella},
title = {Thermomechanical Stresses in Silicon Chips for Optoelectronic Devices},
journal = {Applied Sciences},
year = {2023},
volume = {13},
number = {4},
pages = {2737},
doi = {10.3390/app13042737}
}
EUVIMED