EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D-Printed Electrochemical Sensors: A Comprehensive Review of Clinical Analysis Applications

Thaís Cristina de Oliveira Cândido, Daniela Nunes da Silva, Marcella Matos Cordeiro Borges, Thiago Gabry Barbosa, Scarlat Ohanna Dávila da Trindade, Arnaldo César Pereira

Analytica · 11.11.2024 · 5 (4) · 552-575

DOI: 10.3390/analytica5040037 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Analytica, online erschienen am 11.11.2024. Verfasst von Thaís Cristina de Oliveira Cândido und 5 weiteren Autor:innen. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 133 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional printing technology has emerged as a versatile and cost-effective alternative for the fabrication of electrochemical sensors. To enhance sensor sensitivity and biocompatibility, a diverse range of biocompatible and conductive materials can be employed in these devices. This allows these sensors to be modified to detect a wide range of analytes in various fields. 3D-printed electrochemical sensors have the potential to play a pivotal role in personalized medicine by enabling the real-time monitoring of metabolite and biomarker levels. These data can be used to personalize treatment strategies and optimize patient outcomes. The portability and low-cost nature of 3D-printed electrochemical sensors make them suitable for point-of-care (POC) diagnostics. These tests enable rapid and decentralized analyses, aiding in diagnosis and treatment decisions in resource-limited settings. Among the techniques widely reported in the literature for 3D printing, the fused deposition modeling (FDM) technique is the most commonly used for the development of electrochemical devices due to the easy accessibility of equipment and materials. Focusing on the FDM technique, this review explores the critical factors influencing the fabrication of electrochemical sensors and discusses potential applications in clinical analysis, while acknowledging the challenges that need to be overcome for its effective adoption.

Zitieren

APA

Cândido, T. C. D. O., Silva, D. N. D., Borges, M. M. C., Barbosa, T. G., Trindade, S. O. D. D., & Pereira, A. C. (2024). 3D-Printed Electrochemical Sensors: A Comprehensive Review of Clinical Analysis Applications. Analytica, 5(4), 552-575. https://doi.org/10.3390/analytica5040037

Vancouver

Cândido TCDO, Silva DND, Borges MMC, Barbosa TG, Trindade SODD, Pereira AC. 3D-Printed Electrochemical Sensors: A Comprehensive Review of Clinical Analysis Applications. Analytica. 2024;5(4):552-575. doi:10.3390/analytica5040037

BibTeX
@article{Cndido2024,
  author = {Cândido, Thaís Cristina de Oliveira and Silva, Daniela Nunes da and Borges, Marcella Matos Cordeiro and Barbosa, Thiago Gabry and Trindade, Scarlat Ohanna Dávila da and Pereira, Arnaldo César},
  title = {3D-Printed Electrochemical Sensors: A Comprehensive Review of Clinical Analysis Applications},
  journal = {Analytica},
  year = {2024},
  volume = {5},
  number = {4},
  pages = {552--575},
  doi = {10.3390/analytica5040037}
}
Kostenlos starten →