Development of a 3D Microfluidic Analytical Device for the Detection of Pathogenic Bacteria in Commercial Food Samples with Loop-Mediated Isothermal Amplification
Acta Microbiologica Hellenica · 2024
DOI: 10.3390/amh69010006 ↗Kurz gefasst
Fachartikel in der Zeitschrift Acta Microbiologica Hellenica, 2024. Verfasst von Spyridon-Andreas Papatheodorou und 8 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Foundation Flanders (FWO).
Abstract (Originalsprache)
Traditional methods of detecting foodborne pathogens take several days to produce the required results. Furthermore, various molecular techniques (e.g., PCR) that also produce reliable results in the detection of pathogenic bacteria have been introduced, but the cost–time ratio required does not allow them to be considered a substantial solution to this specific problem. Three-dimensional (3D) printing technology provides the ability to design and manufacture microfluidic analytical devices using conventional 3D printers, which, in combination with colorimetric loop-mediated isothermal amplification (LAMP), may further simplify the process. The overall reduction in time and cost may provide the opportunity to upscale this diagnostic modality. Moreover, unlike most microfluidic analytical devices, this technique is simpler and more user-friendly, as it does not require any expertise or additional equipment apart from a conventional oven. A 3D-printed microfluidic analytical device in combination with LAMP was developed and tested for the simultaneous detection of foodborne pathogens in food samples. A total of 150 commercial food specimens (50 milk, 50 chicken, 50 lettuce samples) were analyzed for possible contamination with Salmonella typhimurium, Listeria monocytogenes and Escherichia coli. The 3D-printed microfluidic device was 100% precise for both negative (80 samples) and positive samples (7 samples were positive for S. typhimurium, 28 for L. monocytogenes, and 35 for E. coli) for all pathogens. Overall, the amount of data analyzed led to a high level of confidence in the precision of this device. As such, this new 3D device in combination with LAMP provides a precise detection method for food pathogens with a low detection limit.
Förderung
- Research Foundation Flanders (FWO)
Zitieren
APA
Papatheodorou, S., Houhoula, D., Magoulas, S., Tsantes, A. G., Tsakali, E., Akkermans, S., Impe, J. V., Halvatsiotis, P., & Tsantes, A. E. (2024). Development of a 3D Microfluidic Analytical Device for the Detection of Pathogenic Bacteria in Commercial Food Samples with Loop-Mediated Isothermal Amplification. Acta Microbiologica Hellenica. https://doi.org/10.3390/amh69010006
Vancouver
Papatheodorou S, Houhoula D, Magoulas S, Tsantes AG, Tsakali E, Akkermans S, et al. Development of a 3D Microfluidic Analytical Device for the Detection of Pathogenic Bacteria in Commercial Food Samples with Loop-Mediated Isothermal Amplification. Acta Microbiologica Hellenica. 2024. doi:10.3390/amh69010006
BibTeX
@article{Papatheodorou2024,
author = {Papatheodorou, Spyridon-Andreas and Houhoula, Dimitra and Magoulas, Sotirios and Tsantes, Andreas G. and Tsakali, Efstathia and Akkermans, Simen and Impe, Jan Van and Halvatsiotis, Panagiotis and Tsantes, Argyrios E.},
title = {Development of a 3D Microfluidic Analytical Device for the Detection of Pathogenic Bacteria in Commercial Food Samples with Loop-Mediated Isothermal Amplification},
journal = {Acta Microbiologica Hellenica},
year = {2024},
doi = {10.3390/amh69010006}
}
EUVIMED