Quantitative Analysis of Process Parameter Effects on Deposition Layer Geometry in DED Additive Manufacturing
Academic Journal of Science and Technology · 03.03.2026 · 20 (1) · 12-20
DOI: 10.54097/pv41bn37 ↗Kurz gefasst
Fachartikel in der Zeitschrift Academic Journal of Science and Technology, online erschienen am 03.03.2026. Verfasst von Junjie Dai und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In laser-directed energy deposition (DED), the geometric characteristics of individual deposited layers—height (H) and width (W)—fundamentally determine the dimensional accuracy of final components. This study quantifies the effects of three key process parameters—laser power, scanning speed, and powder feed rate—on H and W to establish a quantitative basis for dimensional control. A full factorial design (5×4×3) was employed, generating 60 single-track samples. Three-way ANOVA was applied to identify significant factors, quantify contribution ratios, and examine interactions. Results show excellent model fit (H: R²=96.47%, W: R²=97.51%). For height H, powder feed rate dominates (57% contribution), followed by scanning speed (31%), while laser power shows no significant effect (P>0.05). For width W, laser power dominates (60%), followed by scanning speed (28%). A significant interaction exists between scanning speed and powder feed rate for width (P
Zitieren
APA
Dai, J., & Zhang, C. (2026). Quantitative Analysis of Process Parameter Effects on Deposition Layer Geometry in DED Additive Manufacturing. Academic Journal of Science and Technology, 20(1), 12-20. https://doi.org/10.54097/pv41bn37
Vancouver
Dai J, Zhang C. Quantitative Analysis of Process Parameter Effects on Deposition Layer Geometry in DED Additive Manufacturing. Academic Journal of Science and Technology. 2026;20(1):12-20. doi:10.54097/pv41bn37
BibTeX
@article{Dai2026,
author = {Dai, Junjie and Zhang, Chengyu},
title = {Quantitative Analysis of Process Parameter Effects on Deposition Layer Geometry in DED Additive Manufacturing},
journal = {Academic Journal of Science and Technology},
year = {2026},
volume = {20},
number = {1},
pages = {12--20},
doi = {10.54097/pv41bn37}
}
EUVIMED