Interaction of Carbon, Titanium, and Boron in Micro-Alloy Steels and Its Effect on Hot Ductility
Alloys · 06.07.2022 · 1 (2) · 133-148
DOI: 10.3390/alloys1020009 ↗Kurz gefasst
Fachartikel in der Zeitschrift Alloys, online erschienen am 06.07.2022. Verfasst von Jacek Komenda und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Fund for Coal and Steel.
Abstract (Originalsprache)
Varying contents of carbon, titanium and boron were used in the base steel composition of 0.30 wt% Si, 2.0 wt% Mn, 0.006 wt% S, 0.03 wt% Nb, and 30–35 ppm N. Hot ductility tests were performed with Gleeble-3800, after the steel sample was in-situ melted, solidified, and cooled to the test temperature. Investigation was completed with thermodynamic and kinetic simulations. The best results were obtained for steels containing 58–100 ppm B and 35 ppm Ti. They showed very good hot ductility of 80–50% RA within the temperature range between 1250 °C and 800 °C. It was shown that titanium and boron were effective in improving the hot ductility. Titanium protected boron from binding into BN and was low enough to prevent excessive (Ti,Nb) carbonitride precipitation, which both could decrease hot ductility. Boron that precipitated along austenite grain boundaries as iron boride Fe2B was very beneficial for the hot ductility of steel.
Förderung
- Research Fund for Coal and Steel
Zitieren
APA
Komenda, J., Luo, C., & Lönnqvist, J. (2022). Interaction of Carbon, Titanium, and Boron in Micro-Alloy Steels and Its Effect on Hot Ductility. Alloys, 1(2), 133-148. https://doi.org/10.3390/alloys1020009
Vancouver
Komenda J, Luo C, Lönnqvist J. Interaction of Carbon, Titanium, and Boron in Micro-Alloy Steels and Its Effect on Hot Ductility. Alloys. 2022;1(2):133-148. doi:10.3390/alloys1020009
BibTeX
@article{Komenda2022,
author = {Komenda, Jacek and Luo, Chunhui and Lönnqvist, Johan},
title = {Interaction of Carbon, Titanium, and Boron in Micro-Alloy Steels and Its Effect on Hot Ductility},
journal = {Alloys},
year = {2022},
volume = {1},
number = {2},
pages = {133--148},
doi = {10.3390/alloys1020009}
}
EUVIMED