EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Testing of Bionic-Feature-Based 3D-Printed Flexible End-Effectors for Picking Horn Peppers

Lexing Deng, Tianyu Liu, Ping Jiang, Aolin Qi, Yuchen He, Yujie Li, Mingqin Yang, Xin Deng

Agronomy · 26.08.2023 · 13 (9) · 2231

DOI: 10.3390/agronomy13092231 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Agronomy, online erschienen am 26.08.2023. Verfasst von Lexing Deng und 7 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Hunan Agricultural Machinery Equipment and Technological Innovation R&D Project, the National Key R&D Program, the Hunan Agricultural University Student Innovation and Entrepreneurship Training Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To solve the problems of poor adaptability and large sizes of pepper harvesting machinery in facility agriculture to enhance the efficiency and quality of pepper harvesting and ultimately boost farmers’ income, several flexible end-effectors were designed. These end-effectors were tailored to the unique morphologies of horn peppers, drawing inspiration from biomimicry. Subsequently, we conducted experimental verification to validate their performance. Four biological features, namely, the outer contours of a Vicia faba L. fruit, an Abelmoschus esculentus fruit, the upper jaw of a Lucanidae, and a Procambarus clarkii claw, were selected and designed using 3D software. In order to ascertain the structural viability and establish the initial design framework for the test end-effector, a simulation analysis to evaluate the strength and deformation of the flexible end-effector under various pepper-picking conditions was conducted. PLA material and 3D printing technology were used to create the end-effector, and, together with the mobile robotic arm platform ROSMASTER X3 PLUS, they were used to build a test prototype; a pepper tensile test was performed to pre-determine the reasonableness of the picking program, and then a prototype was created for the actual picking of the peppers to compare the picking effectiveness of several types of flexible end-effectors. In six experiments, each flexible end was harvested for 120 horn peppers. The Vicia faba L. flexible end-effector had the lowest average breakage rate. The average breakage rate was 1.7%. At the same time, it had the lowest average drop rate. The average drop rate was 3.3%. The test results indicated that the flexible end-effector that emulated the outer contour characteristics of the Vicia faba L. fruit demonstrated the most favorable outcomes. This design exhibited high working efficiency and the lowest rates of fruit breakage and fruit drops, surpassing both the artificial and traditional machine picking methods and effectively fulfilling the requirements for pepper-picking operations in facility agriculture.

Förderung

  • the Hunan Agricultural Machinery Equipment and Technological Innovation R&D Project
  • the National Key R&D Program
  • the Hunan Agricultural University Student Innovation and Entrepreneurship Training Program
  • Hunan Provincial Department of Education Scientific Research Project

Zitieren

APA

Deng, L., Liu, T., Jiang, P., Qi, A., He, Y., Li, Y., Yang, M., & Deng, X. (2023). Design and Testing of Bionic-Feature-Based 3D-Printed Flexible End-Effectors for Picking Horn Peppers. Agronomy, 13(9), 2231. https://doi.org/10.3390/agronomy13092231

Vancouver

Deng L, Liu T, Jiang P, Qi A, He Y, Li Y, et al. Design and Testing of Bionic-Feature-Based 3D-Printed Flexible End-Effectors for Picking Horn Peppers. Agronomy. 2023;13(9):2231. doi:10.3390/agronomy13092231

BibTeX
@article{Deng2023,
  author = {Deng, Lexing and Liu, Tianyu and Jiang, Ping and Qi, Aolin and He, Yuchen and Li, Yujie and Yang, Mingqin and Deng, Xin},
  title = {Design and Testing of Bionic-Feature-Based 3D-Printed Flexible End-Effectors for Picking Horn Peppers},
  journal = {Agronomy},
  year = {2023},
  volume = {13},
  number = {9},
  pages = {2231},
  doi = {10.3390/agronomy13092231}
}
Kostenlos starten →