EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Testing of an End-Effector for Tomato Picking

Tianchi Wang, Weiwei Du, Lingshen Zeng, Long Su, Yiming Zhao, Fang Gu, Li Liu, Qian Chi

Agronomy · 22.03.2023 · 13 (3) · 947

DOI: 10.3390/agronomy13030947 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Agronomy, online erschienen am 22.03.2023. Verfasst von Tianchi Wang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Shaanxi Key Research and Development Program of China, National Natural Science Foundation of China, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Based on the structural shortage of an agricultural labor force and the continuous increase in tomato planting scale in China, as well as the limitation of a greenhouse working environment on the development of tomato picking productivity, a motor-driven end-effector for a tomato picking robot based on a hybrid force/position control strategy was designed. First, a hybrid force/position control strategy was applied to control the picking process. Consistent with this strategy, the mechanical structure design of the end-effector was determined. The maximum torque of the finger joint motor was verified by applying a load to the end-effector fingertip under a parabolic linear angular velocity. Second, the D-H method was used to establish the end-effector single-finger and whole-hand coordinate systems and to perform forward and inverse kinematic analysis. The Monte Carlo method was used to analyze the workspace of the end-effector, and an isochronous interpolation algorithm was used to analyze the angular displacement of the motor. A basic algorithm for starting, stopping and accelerating the finger joints was designed to achieve the smooth movement of the end-effector. The control system for the end-effector was designed based on STM32F103ZET6, and the end-effector remote wireless debugging system was designed based on Tiny6410. Finally, a test prototype of the tomato picking end-effector was manufactured and picking tests were conducted, which showed that our tomato picking end-effector moved smoothly. The proposed control algorithm reduced the impact force and recorded the contact force between the end-effector and the tomato in real time, and the end-effector essentially achieved nondestructive picking. Therefore, our tomato picking end-effector demonstrated good utility in practice.

Förderung

  • the Shaanxi Key Research and Development Program of China
  • National Natural Science Foundation of China
  • National Key Research and Development Program of China
  • Innovative Training Program for College Students of Northwest A&F University

Zitieren

APA

Wang, T., Du, W., Zeng, L., Su, L., Zhao, Y., Gu, F., Liu, L., & Chi, Q. (2023). Design and Testing of an End-Effector for Tomato Picking. Agronomy, 13(3), 947. https://doi.org/10.3390/agronomy13030947

Vancouver

Wang T, Du W, Zeng L, Su L, Zhao Y, Gu F, et al. Design and Testing of an End-Effector for Tomato Picking. Agronomy. 2023;13(3):947. doi:10.3390/agronomy13030947

BibTeX
@article{Wang2023,
  author = {Wang, Tianchi and Du, Weiwei and Zeng, Lingshen and Su, Long and Zhao, Yiming and Gu, Fang and Liu, Li and Chi, Qian},
  title = {Design and Testing of an End-Effector for Tomato Picking},
  journal = {Agronomy},
  year = {2023},
  volume = {13},
  number = {3},
  pages = {947},
  doi = {10.3390/agronomy13030947}
}
Kostenlos starten →