Optimization of Fluidized-Bed Process Parameters for Coating Uniformity and Nutrient-Release Characteristics of Controlled-Release Urea Produced by Modified Lignocellulosic Coating Material
Agronomy · 28.02.2023 · 13 (3) · 725
DOI: 10.3390/agronomy13030725 ↗Kurz gefasst
Fachartikel in der Zeitschrift Agronomy, online erschienen am 28.02.2023. Verfasst von Arshid Mahmood Ali und 7 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education and King Abdulaziz University.
Abstract (Originalsprache)
Controlled-release fertilizers are employed in precision agriculture to optimize technology-enabled farming without environmental deterioration. In this study, almond-shell lignocellulosic waste particles are chemically processed to synthesize a coating suspension for the production of controlled-release urea (CRU) in a Wurster fluidized-bed reactor. The interactive effect of process parameters such as atomizing air pressure (Pair), fluidized-bed temperature (Tfb), spray rate (Rspray), and fluidizing-air flow rate (Qair) on the (i) coating-film uniformity of CRU particles and (ii) longevity of nutrient-release from CRU is reported. CCRD is used with RSM to design the experiments for the optimization of nutrient-release performance and coating-film uniformity in terms of a coefficient-of-variance (CoV) of film thickness. The regression models indicate a good prediction of coating-film uniformity and nutrient-release time, with R2 = 0.971 and R2 = 0.98, respectively. The optimum conditions for coating-film uniformity are determined to be Pair = 3.5 bar, Tfb = 80 °C, Rspray = 0.15 mL/s, and Qair = 72 m3/h, with a predicted CoV film thickness of 11.5%. Similarly, Pair = 3.2 bar, Tfb = 78 °C, Rspray = 0.125 mL/s, and Qair = 75 m3/h are the optimum conditions for nutrient-release performance, with a prediction nutrient-release time = 56 h. The experimental validation yields a CoV of film thickness = 12.6% and a nutrient-release time = 49.5 h, indicating good agreement between predicted and experimental values. In addition, Tfb appears to be the most significant parameter.
Förderung
- Ministry of Education and King Abdulaziz University
Zitieren
APA
Ali, A. M., Azeem, B., Alghamdi, A. M., Shahzad, K., Al-Zahrani, A. A., Rashid, M. I., Mahpudz, A. B., & Jamil, A. (2023). Optimization of Fluidized-Bed Process Parameters for Coating Uniformity and Nutrient-Release Characteristics of Controlled-Release Urea Produced by Modified Lignocellulosic Coating Material. Agronomy, 13(3), 725. https://doi.org/10.3390/agronomy13030725
Vancouver
Ali AM, Azeem B, Alghamdi AM, Shahzad K, Al-Zahrani AA, Rashid MI, et al. Optimization of Fluidized-Bed Process Parameters for Coating Uniformity and Nutrient-Release Characteristics of Controlled-Release Urea Produced by Modified Lignocellulosic Coating Material. Agronomy. 2023;13(3):725. doi:10.3390/agronomy13030725
BibTeX
@article{Ali2023,
author = {Ali, Arshid Mahmood and Azeem, Babar and Alghamdi, Ahmad M. and Shahzad, Khurram and Al-Zahrani, Abdulrahim Ahmad and Rashid, Muhammad Imtiaz and Mahpudz, Aishah Binti and Jamil, Asif},
title = {Optimization of Fluidized-Bed Process Parameters for Coating Uniformity and Nutrient-Release Characteristics of Controlled-Release Urea Produced by Modified Lignocellulosic Coating Material},
journal = {Agronomy},
year = {2023},
volume = {13},
number = {3},
pages = {725},
doi = {10.3390/agronomy13030725}
}
EUVIMED