Humic Acid–Functionalized Starch Gel Coatings for Controlled-Release Urea Fertilizer via Wurster Fluidized-Bed System
Gels · 27.03.2026 · 12 (4) · 281
DOI: 10.3390/gels12040281 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gels, online erschienen am 27.03.2026. Verfasst von Babar Azeem und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, College of Engineering, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh 11564, Saudi Arabia. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Sustainable fertilizer technologies are essential to address nutrient losses, environmental pollution, and inefficiencies associated with conventional urea application. In this study, humic acid–functionalized starch (St–HA) gel coatings were developed and optimized via a Wurster fluidized-bed system to produce controlled-release urea granules, with an additional carnauba wax outer layer to further extend nutrient release duration. The coating formulation was synthesized through in situ crosslinking of tapioca starch with humic acid using N,N′-methylenebisacrylamide and potassium persulfate, yielding a cohesive film. A central composite rotatable design (CCRD) was employed to investigate the influence of atomizing air pressure, fluidizing air flow rate, fluidized-bed temperature, and spray rate on coating performance. Comprehensive characterization; including FTIR, XRD, rheological analysis, thermogravimetric studies, water retention, biodegradability, and surface abrasion, confirmed chemical crosslinking, structural stability, and mechanical robustness of the coatings. Nitrogen release analysis in both water and soil demonstrated a substantial extension of release longevity from less than 2 days (uncoated) to 18–20 days for St–HA-coated urea, and up to 28 days with the additional wax coating. Coated granules exhibited low abrasion (8–24%), high water-retention capacity, and 68% biodegradation in 60 days, ensuring environmental compatibility. The findings establish St–HA/wax hybrid coatings as a viable, eco-friendly strategy for controlled-release fertilizers, integrating renewable feedstocks with scalable industrial processing for precision nutrient management.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, College of Engineering, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh 11564, Saudi Arabia.
- Chemical Engineering Department, Prince Mohammad Bin Fahd University, Al Khobar 34754, Saudi Arabia.
- Centre of Innovative Nanostructures & Nanodevices (COINN), Universiti Teknologi PETRONAS, Bandar Seri Iskandar 32610, Perak, Malaysia.
- Interdisciplinary Research Center for Hydrogen Technologies and Carbon Management, King Fahad University of Petroleum & Minerals, Dharhan 31216, Saudi Arabia.
- Department of Chemical Engineering and Technology, University of Gujrat, Gujrat 50700, Pakistan.
ORCID-Profile: KuZilati KuShaari
Zitieren
APA
Azeem, B., KuShaari, K., Shahid, M. U., Shahid, M. Z., & Basit, A. (2026). Humic Acid–Functionalized Starch Gel Coatings for Controlled-Release Urea Fertilizer via Wurster Fluidized-Bed System. Gels, 12(4), 281. https://doi.org/10.3390/gels12040281
Vancouver
Azeem B, KuShaari K, Shahid MU, Shahid MZ, Basit A. Humic Acid–Functionalized Starch Gel Coatings for Controlled-Release Urea Fertilizer via Wurster Fluidized-Bed System. Gels. 2026;12(4):281. doi:10.3390/gels12040281
BibTeX
@article{Azeem2026,
author = {Azeem, Babar and KuShaari, KuZilati and Shahid, Muhammad Umair and Shahid, Muhammad Zubair and Basit, Abdul},
title = {Humic Acid–Functionalized Starch Gel Coatings for Controlled-Release Urea Fertilizer via Wurster Fluidized-Bed System},
journal = {Gels},
year = {2026},
volume = {12},
number = {4},
pages = {281},
doi = {10.3390/gels12040281}
}
EUVIMED