Investigation of the Structural and Technological Configuration and Design Parameters of a Heavy Disc Harrow for Soil Tillage
AgriEngineering · 17.11.2026 · 8 (11) · 495
DOI: 10.3390/agriengineering8110495 ↗Kurz gefasst
Fachartikel in der Zeitschrift AgriEngineering, online erschienen am 17.11.2026. Verfasst von Yurij Polichshuk und 5 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Industrial Development Committee of the Ministry of Industry and Construction of the Republic of Kazakhstan.
Abstract (Originalsprache)
This study evaluated the agrotechnical, energy, and operational performance of a 7.0 m heavy disc harrow (two rows, eight sections, 72 notched discs of 660 mm diameter) designed for traction class 5–6 tractors. Field tests on perennial grass sod used a Kirovets K-735 tractor at angles of attack of 12°, 15°, and 18° and speeds of 9.0–11.5 km h−1. Mean tillage depth was 7.0–9.6 cm, the share of soil particles smaller than 50 mm was 80.1–94.5%, and crop residue incorporation was 60.0–92.7%. Draft resistance (44.1–53.9 kN) remained below the 65 kN limit, and specific energy consumption was 62.6–76.8 MJ ha−1. At the common speed of 10.8 km h−1, the angle of attack significantly affected tillage depth, draft resistance, residue cutting, and residue incorporation (p < 0.001), but not soil fragmentation or surface roughness. Because speed was not set independently of the angle, the nine single-pass modes form a multi-condition comparison rather than a single-factor experiment. The measured draft was 1.83–2.26 times the value predicted by ASABE D497.7. Complete residue cutting occurred at 18° and, at 15°, only at 11.3 km h−1; at 12°, depth remained below the required 8–12 cm. The results support selecting operating settings under comparable conditions in Northern Kazakhstan.
Förderung
- Industrial Development Committee of the Ministry of Industry and Construction of the Republic of Kazakhstan
Zitieren
APA
Polichshuk, Y., Komarov, A., Derepaskin, A., Binyukov, Y., Kravchenko, R., & Laptev, N. (2026). Investigation of the Structural and Technological Configuration and Design Parameters of a Heavy Disc Harrow for Soil Tillage. AgriEngineering, 8(11), 495. https://doi.org/10.3390/agriengineering8110495
Vancouver
Polichshuk Y, Komarov A, Derepaskin A, Binyukov Y, Kravchenko R, Laptev N. Investigation of the Structural and Technological Configuration and Design Parameters of a Heavy Disc Harrow for Soil Tillage. AgriEngineering. 2026;8(11):495. doi:10.3390/agriengineering8110495
BibTeX
@article{Polichshuk2026,
author = {Polichshuk, Yurij and Komarov, Artem and Derepaskin, Alexey and Binyukov, Yurij and Kravchenko, Ruslan and Laptev, Nikolay},
title = {Investigation of the Structural and Technological Configuration and Design Parameters of a Heavy Disc Harrow for Soil Tillage},
journal = {AgriEngineering},
year = {2026},
volume = {8},
number = {11},
pages = {495},
doi = {10.3390/agriengineering8110495}
}
EUVIMED