EUVIMEDEUVIMED entdecken
Crossref

Design Parameters of Disc Levellers for the Track Loosener of a Two Pass Mounted Harrow

Abdusalim Tukhtakuziyev, Otaboyev o‘g‘li, Ermatov Abdivaitovich

Applied Engineering · 31.10.2026 · 10 (2) · 31-35

DOI: 10.11648/j.ae.20261002.12 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Engineering, online erschienen am 31.10.2026. Verfasst von Abdusalim Tukhtakuziyev und 2 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The article examines the improvement of the working process of a two-track mounted harrowing unit designed to improve the quality of surface soil tillage and reduce operational costs. The main shortcomings of two-track tooth harrows used under the conditions of the Republic of Uzbekistan are analyzed, including the need to periodically stop the unit for manual removal of weeds and plant residues from the working bodies, increased labor requirements, difficulties in transportation from one field to another, low maneuverability, and large overall dimensions. To eliminate these shortcomings, a two-track mounted harrowing unit has been developed, consisting of a frame, a three-point hitch, tooth harrows connected to the frame by chain links, support skids, and track loosening devices. The track loosener includes a loosening tine and disk levellers mounted on the frame by means of a parallelogram mechanism. Based on the laws and principles of agricultural mechanics, theoretical studies were conducted on the interaction of the disk levellers with the soil, and their main structural and technological parameters were substantiated. It was established that, to ensure the required levelling of the soil surface, the diameter of the disk levellers should be at least 21 cm, the working width should be 12 cm, the installation angle relative to the direction of travel should be 37°, the radius of curvature of the working surface should be 32 cm, and the distance between the disks should be 26 cm. The obtained results can be used in the development, design, and manufacture of two-track mounted harrowing units.

Zitieren

APA

Tukhtakuziyev, A., o‘g‘li, O., & Abdivaitovich, E. (2026). Design Parameters of Disc Levellers for the Track Loosener of a Two Pass Mounted Harrow. Applied Engineering, 10(2), 31-35. https://doi.org/10.11648/j.ae.20261002.12

Vancouver

Tukhtakuziyev A, o‘g‘li O, Abdivaitovich E. Design Parameters of Disc Levellers for the Track Loosener of a Two Pass Mounted Harrow. Applied Engineering. 2026;10(2):31-35. doi:10.11648/j.ae.20261002.12

BibTeX
@article{Tukhtakuziyev2026,
  author = {Tukhtakuziyev, Abdusalim and o‘g‘li, Otaboyev and Abdivaitovich, Ermatov},
  title = {Design Parameters of Disc Levellers for the Track Loosener of a Two Pass Mounted Harrow},
  journal = {Applied Engineering},
  year = {2026},
  volume = {10},
  number = {2},
  pages = {31--35},
  doi = {10.11648/j.ae.20261002.12}
}
Kostenlos starten →