Experimental and Numerical Study on Flow and Heat Transfer Characteristics of Additively Manufactured Triply Periodic Minimal Surface (TPMS) Heat Exchangers for Micro Gas Turbine
Aerospace · 07.05.2025 · 12 (5) · 416
DOI: 10.3390/aerospace12050416 ↗Kurz gefasst
Fachartikel in der Zeitschrift Aerospace, online erschienen am 07.05.2025. Verfasst von Xiyuan Su und 4 weiteren Autor:innen. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shenzhen Science and Technology Program, Shandong Industry Leading Talent Program.
Abstract (Originalsprache)
This paper proposes two compact, efficient, and lightweight heat exchangers based on triply periodic minimal surfaces (TPMSs). Designed in an annular configuration, the heat exchangers meet the requirements of micro gas turbines for compactness. Two prototypes of Diamond and Gyroid modular TPMS heat exchangers were fabricated using selective laser melting (SLM) with stainless steel. The flow and heat transfer experimental results indicate that, within a Reynolds number range of 200 to 800, the effectiveness of both heat exchangers remained above 0.62, and the average Nusselt numbers of the Diamond and Gyroid structures reached 3.60 and 4.06 times that of the printed circuit heat exchanger (PCHE), respectively. Although both heat exchangers exhibited relatively high friction factors, their overall performance surpassed that of conventional heat exchangers. Additionally, performance comparisons with existing TPMS heat exchangers revealed that smaller lattice sizes contribute to improved volume-based power density, although they result in increased pressure loss. Simulation results indicated that the “merge–split” effect present in both structures enhances heat transfer between the fluid and the wall. Furthermore, the complex channels of the TPMS structures ensure that the fluid maintains strong turbulence intensity throughout the heat exchanger. This study demonstrates that stainless steel TPMS structures can serve as excellent candidates for applications in micro gas turbines.
Förderung
- National Natural Science Foundation of China
- Shenzhen Science and Technology Program
- Shandong Industry Leading Talent Program
- Program for International Scientific Cooperation at Science and Technology Commission of Shanghai Municipality
Zitieren
APA
Su, X., Zhang, Y., Rao, Y., Yeranee, K., & Wang, X. (2025). Experimental and Numerical Study on Flow and Heat Transfer Characteristics of Additively Manufactured Triply Periodic Minimal Surface (TPMS) Heat Exchangers for Micro Gas Turbine. Aerospace, 12(5), 416. https://doi.org/10.3390/aerospace12050416
Vancouver
Su X, Zhang Y, Rao Y, Yeranee K, Wang X. Experimental and Numerical Study on Flow and Heat Transfer Characteristics of Additively Manufactured Triply Periodic Minimal Surface (TPMS) Heat Exchangers for Micro Gas Turbine. Aerospace. 2025;12(5):416. doi:10.3390/aerospace12050416
BibTeX
@article{Su2025,
author = {Su, Xiyuan and Zhang, Yueliang and Rao, Yu and Yeranee, Kirttayoth and Wang, Xintong},
title = {Experimental and Numerical Study on Flow and Heat Transfer Characteristics of Additively Manufactured Triply Periodic Minimal Surface (TPMS) Heat Exchangers for Micro Gas Turbine},
journal = {Aerospace},
year = {2025},
volume = {12},
number = {5},
pages = {416},
doi = {10.3390/aerospace12050416}
}
EUVIMED