EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multibody Analysis of Lever-Spring Landing Gear with Elastomer Shock Absorbers: Modelling, Simulations and Drop Tests

Fuyou Li, Jianxin Zhu, Xiangfu Zou, Zhongjian Pan, Jian Chen

Aerospace · 23.04.2025 · 12 (5) · 367

DOI: 10.3390/aerospace12050367 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Aerospace, online erschienen am 23.04.2025. Verfasst von Fuyou Li und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Special Funding Programme for Hunan Innovative Province Construction, Nature Science Foundation of Hunan Province, Central South University Postgraduate Industry-Academia Collaborative Innovation Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the ground reaction force of lever-spring landing gear (LSLG) equipped with compressible elastomer shock absorbers (ESA) during the landing process. First, a numerical dynamic model of the LSLG was developed in MATLAB/Simulink, revealing that runway roughness exerts a negligible influence on the ground reaction force during landing. The load characteristics established fundamental references for subsequent FEA-based structural design. Furthermore, an FEA model integrating the LSLG and the aircraft was developed with parameters calibrated for elastic units. The multibody dynamics simulation (MBDS) quantified the vertical ground reaction force and the structural stresses of LSLG, demonstrating two critical relationships: (1) the overload coefficient correlated with the sinking velocity yet exhibits no correlation with aircraft mass and (2) the peak of oscillating force attenuated faster with heavier landing weight at higher sinking velocities. A nonlinear multi-variables function was fitted to predict the maximum vertical ground reaction force. Subsequently, experimental validation via a landing gear drop test (LGDT) showed a maximum error of 8.39% between the results of the LGDT and the MBDS, confirming the accuracy of simulation and the fitting surface function for force prediction. The study further validates the feasibility and reliability of using the MBDS to model and study the LSLG with ESAs.

Förderung

  • Special Funding Programme for Hunan Innovative Province Construction
  • Nature Science Foundation of Hunan Province
  • Central South University Postgraduate Industry-Academia Collaborative Innovation Project
  • Central South University Postgraduate Scientific Research Practice Project

Zitieren

APA

Li, F., Zhu, J., Zou, X., Pan, Z., & Chen, J. (2025). Multibody Analysis of Lever-Spring Landing Gear with Elastomer Shock Absorbers: Modelling, Simulations and Drop Tests. Aerospace, 12(5), 367. https://doi.org/10.3390/aerospace12050367

Vancouver

Li F, Zhu J, Zou X, Pan Z, Chen J. Multibody Analysis of Lever-Spring Landing Gear with Elastomer Shock Absorbers: Modelling, Simulations and Drop Tests. Aerospace. 2025;12(5):367. doi:10.3390/aerospace12050367

BibTeX
@article{Li2025,
  author = {Li, Fuyou and Zhu, Jianxin and Zou, Xiangfu and Pan, Zhongjian and Chen, Jian},
  title = {Multibody Analysis of Lever-Spring Landing Gear with Elastomer Shock Absorbers: Modelling, Simulations and Drop Tests},
  journal = {Aerospace},
  year = {2025},
  volume = {12},
  number = {5},
  pages = {367},
  doi = {10.3390/aerospace12050367}
}
Kostenlos starten →