Improved Multi-Body Dynamic Simulation of Landing Gear Drop Test Incorporating Structural Flexibility and Bearing Contact
Aerospace · 02.07.2024 · 11 (7) · 543
DOI: 10.3390/aerospace11070543 ↗Kurz gefasst
Fachartikel in der Zeitschrift Aerospace, online erschienen am 02.07.2024. Verfasst von Wenbin Liu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shanghai Aircraft Design and Research Institute, China Commercial Aircraft Corporation.
Abstract (Originalsprache)
The investigation of multi-body dynamics (MBD) modeling for landing gear drop tests is a hot topic in the realm of landing gear design. The current results were primarily focused on the multi-rigid body simulation or a simple multi-flexible body simulation, with little regard for the correctness of longitudinal loads and their experimental confirmation, particularly wheel–axle loads. Based on a genuine oleo-pneumatic landing gear drop test of a large civil aircraft, enhanced multi-body dynamics simulation research is carried out, considering the structural flexibility and bearing support by adopting flexible multi-bodies modeling and rigid-flex coupling contacts. When compared to the test data, which purposefully measured the longitudinal wheel–axle loads, the simulation results show that the loads, shock absorber compression, and shock absorber inner pressures are all within good agreement. Furthermore, the influence of structural stiffness and bearing contact was investigated by adjusting the model settings to confirm their importance.
Förderung
- Shanghai Aircraft Design and Research Institute, China Commercial Aircraft Corporation
Zitieren
APA
Liu, W., & Wang, Y. (2024). Improved Multi-Body Dynamic Simulation of Landing Gear Drop Test Incorporating Structural Flexibility and Bearing Contact. Aerospace, 11(7), 543. https://doi.org/10.3390/aerospace11070543
Vancouver
Liu W, Wang Y. Improved Multi-Body Dynamic Simulation of Landing Gear Drop Test Incorporating Structural Flexibility and Bearing Contact. Aerospace. 2024;11(7):543. doi:10.3390/aerospace11070543
BibTeX
@article{Liu2024,
author = {Liu, Wenbin and Wang, Youshan},
title = {Improved Multi-Body Dynamic Simulation of Landing Gear Drop Test Incorporating Structural Flexibility and Bearing Contact},
journal = {Aerospace},
year = {2024},
volume = {11},
number = {7},
pages = {543},
doi = {10.3390/aerospace11070543}
}
EUVIMED